English
CLEANING THE HOSE AND NOZZLE
The vacuum cleaner stops automatically if the nozzle, tube,
hoseorfiltersands-bag®becomesblocked.Insuchcases,
disconnectfrommainsandallowtocoolfor20-30minutes.
Clearblockageand/orreplacefiltersands-bag®andrestart.
Tubes and hoses
1Useacleaningstriporsimilartoclearthetubesandhose.
2 It may also be possible to remove the obstruction in the
hosebysqueezingit.However,becarefulincasethe
obstruction is caused by glass or needles caught inside
thehose.
Note: The warranty does not cover any damage to the hose
caused by cleaning it.
Cleaning the floor nozzle
3 To avoid deterioration of suction power, frequently
cleanthecarpet/hardfloornozzle.Theeasiestwayto
cleanitisbyusingthehosehandle.
4 Presseachwheel-hubanddrawawaythewheels.
5 Removedust-balls,hairorotherobjectsthatmaybe
entangled.Usethecrevicenozzletocleanthewheel
axles.Replacethewheelsbypressingthemontothe
axles.
6 Largerobjectscanbeaccessedbyremovingthecon-
nection hose (press the small catches located on each
side and simultaneously draw the connection tube
outwardsinanuprightposition).
7 Removetheobject(s)andreplacetheconnectionhose.
Cleaning the power nozzle
(certain models only)
8 Disconnect from the mains, and remove entangled
threadsetc.bysnippingthemawaywithscissors.
9 Useascrewdrivertoremovethenozzlecover.
10 Remove the brush cylinder and bearings, then clean as
necessary.
11 To clean the wheels, gently lever them from their
mountingsandcleanasnecessary.
12 Replacethecoverandmakesureitissecurelyfastened.
Cleaning the turbo nozzle
(certain models only)
13 Disconnect the nozzle from the vacuum cleaner tube
andremoveentangledthreads,etc.bysnippingthem
awaywithscissors.Usethehosehandletocleanthe
nozzle.