7
Important note: Check that the + and – terminals
are positioned correctly when loading the batteries.
1 LCD display panel
2 “Automatic mode” indicator
3 “Cool” indicator
4 “Dry” indicator
5 “Fan” indicator
6 “Heat” indicator (for SKA 3501 C+H only)
7 Signal indicator – Appears momentarily when
the remote control is pressed correctly.
8 Temperature indicator
9 “Time” indicator (Timer ON/OFF))
10 “Fan speed” indicator
11 “Timer” pushbutton – For adjusting the switch
on/off time.
12 “Mode” pushbutton – Each press moves to the
next mode (Feel-Cool-Dry-Fan-Heat) (“Heat” with
the SKA 3501 C+H only).
13 “Wind” pushbutton – Each press changes the
fan speed (Power-High-Low-Mute (extra quiet)).
14 “Temp / Time D ▼” pushbutton - Each press
reduces the temperature by 1 °C or the time on
the timer by 1h.
15 “ON/OFF” pushbutton – For switching the
device on and off.
16 “Swing” pushbutton – For the electric
adjustment of the slats horizontally. This is for
adjusting the air flow up/down. To lock the slats
in position, press the button twice.
17 “Temp / Time ▲” pushbutton – Each press
increases the temperature by 1 °C or the time on
the timer by 1h.
18 “Sleep” pushbutton – Set this mode if you
wish to have a quiet room while sleeping.
Remote control
