16
GB
A) Installing the exhaust air hose
through an open window
Use the foam parts and shorten them if required.
Guide the exhaust air hose through the opening in
the foam to the outside. Secure the window so that
the foam is kept firmly in place.
Note: Take appropriate precautions to prevent
unauthorized entry through the window.
B) Installation of the exhaust air hose
through the window pane or the wall
Ȝ Cut or drill a hole of approx. 130 mm diameter
though the window pane or the wall.
Ȝ Insert the bushing ring from the outside to the
inside and fasten.
Ȝ Feed the exhaust air hose through the bushing
ring.
Ȝ When the system is not being used, fit the cap on
the bushing ring on the outside.
C) Draining off the condensation water
with the water tank
ALL OF THE CONDENSATION WATER MUST BE
DRAINED OFF BEFORE YOU EVER RELOCATE
OR STOP USING THE DEVICE:
Draining off the condensation water with the
tank.
Note on MKA 3002 M
When the condensation water tank is full the
50 cm
Wall or window pane
Bushing ring
Foam material (15)
Foam material (14)
50 cm
Right
Right
Wrong
Anleitung MKA 3002 M SPK1:Anleitung MKA 3501 E SPK 1 26.10.2006 7:45 Uhr Seite 16
