706110
7
Verklein
Vergroot
Pagina terug
1/51
Pagina verder
HI FIDELITY FOR LOW FREQUENCY
| 13
EDEN
| WTP SERIES |
WTP900
REAR PANEL FEATURES - 9
12 | HI FIDELITY FOR LOW FREQUENCY
EDEN
| WTP SERIES |
REAR PANEL FEATURES - 8
OFF: When the indicator is off you are not clipping the power stage of the amplier.
AMBER: If the indicator illuminates amber this means you have clipped the input stage of the amplier briey but not for a
prolonged period of time. If the indicator operates only in the amber stage you are getting the maximum from the input stage of
the amplier without causing undesirable clipping to your sound.
RED: When the indicator illuminates red it will stay on for at least 1 second or continually to indicate clipping of the power
amplier. If the indicator ashes red this means that you are using the amplier outside of its correct limits and the amplier is
overheating this will cause the amplier to go into a safe mode reducing the chance of long term damage to the amplier by
increasing the cooling of the unit and lowering the output volume of the amplier.
26. Master Volume: This adjusts the output volume of the amplier. Use this control in conjunction with the output clip indicators (on
powered units only) to achieve the best performance from your amplier.
27. Illuminated Logo: Logo illuminates when amplier is switched on.
28. OFF / ON switch: Turn your amplier off or on using this switch.
29. Cooling Vent: Provides ventilation for the units cooling system. NEVER OBSTRUCT OR MODIFY THIS OR ANY OTHER VENT ON
YOUR UNIT.
REAR PANEL FEATURES
(For WTP900, WTP600 and WTPre)
Features will be the same for each model except where the functionality is changed due to the absence of one or more power amplifiers
in the product.
Depending on the model you own your World Tour Pro series product may be fitted with up to 3 internal fans. When turning the unit on
these fans will briefly run up and then switch off again. The Fans in World Tour Pro products are only designed to activate when the unit
becomes hot. It is normal for the fans to remain off if not required by the amplifier
Cooling Vent: Provides ventilation for the units cooling system. NEVER OBSTRUCT OR MODIFY THIS OR ANY OTHER VENT ON
YOUR UNIT.
Power Input: Plug your unit in here. Please ensure your unit is of the correct voltage for your region and that you only use an Eden
supplied power cable.
World Tour Pro 900 Rear Panel Features
SPEAKER OUTPUTS: The Eden Illuminated Output System used on World Tour Pro ampliers has been designed by Eden to more
easily allow players to make the right choices with their rig selection. Because the sockets are illuminated, it allows you to simply
select the mode that suits your cabinets ensuring you get the best performance with the equipment you own.
Each mode selected switches between bridge / bi-amp and represents the correct cabinet impedance that should be used with the
associated socket, Green indicates 4ohm compatibility, Amber indicates 8ohm compatibility and red indicates that the socket should
not be used.
Bridge Series: In addition to standard modes the World Tour Pro 900 is able to run in Bridge Series Mode. When engaged the
amplier can be used in bridged mode with 2 - 4ohm cabinets.
1. Speaker Output 1: Depending on selected mode, connect the correct impedance cabinet here using a Speakon speaker lead here.
2. Speaker Output 2: Depending on selected mode, connect the correct impedance cabinet here using a Speakon speaker lead here.
3. Amp Left Speaker 2 Output: Depending on selected mode, connect the correct impedance cabinet here using a Speakon speaker lead
here.
4. Amp Right Speaker 2 Output: Depending on selected mode, connect the correct impedance cabinet here using a Speakon speaker lead
here.
5. Output Left: Take your left signal output (post loop) to external equipment here.
6. Output Right: Take your right signal output (post loop) to external equipment here.
7. Aux Input: Connect Auxiliary input signal from your MP3 player or other device using 3.5mm jack cable here.
8. Headphones: Connect your headphones using this 3.5mm output (the headphone volume is controlled by the Master Volume control on
the amplier front panel).
9. Stereo Loop Return L: Return your left effect chain signal here.
10. Stereo Loop Return R: Return your right effect chain signal here.
11. Balance Control: Use this control to balance the level between the two ampliers.
12. Stereo Loop Send L: Send your left effect chain signal out from here.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eden World Tour Pro Series bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eden World Tour Pro Series in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1,99 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info