706110
5
Verklein
Vergroot
Pagina terug
1/51
Pagina verder
HI FIDELITY FOR LOW FREQUENCY
| 9
8 | HI FIDELITY FOR LOW FREQUENCY
EDEN
| WTP SERIES |
FRONT PANEL FEATURES - 7
EDEN
| WTP SERIES |
BEFORE YOU PLUG IN - 6
BEFORE YOU PLUG IN
In Before you plug in or use your amplier please ensure you know how to correctly operate your unit. Incorrect operation or
installation may lead to undesirable results or unit failure which can be avoided by reading this guide.
Ventilation and Cooling
Important: All World Tour ampliers have been designed to operate in the most demanding of conditions, to ensure your product
performs to the best level every time always ensure ventilation holes and cooling fans are unobstructed so that they can provide the
required airow for the product. The cooling system design for World Tour Pro products means that fans on the product will only
operate when required.
Cabinet Impedance Selection
Important: To get the best from your amplier always ensure that you match it with cabinets that of the right impedance. World Tour
Pro ampliers are tted with revolutionary new illuminated speaker outputs (powered units only) which provide indication of which
impedance cabinets to plug into which socket this is explained in more detail in the back panel segment of this document. To get the
full power from your amplier you will need to operate it at a 4ohm load (8ohm Bridge Mono).
Operating with no load
All Eden World Tour Pro ampliers can safely be used with no load as preampliers for studio recording or as pre ampliers for tone
shaping before a power amplier.
If you are ever unsure about the operation or correct use of a product please contact the store where you bought your amplier, they will be more than
happy to provide advice and support.
PRODUCT FRONT PANEL FEATURES
(For WTP900, WTP600 and WTPre)
All World Tour Pro ampliers are designed with the same front panel features. To understand what each feature does and how to use it
please follow the guide below.
World Tour Pro ampliers are tted with both active and passive inputs and an input gain control. This allows you to nely tune the
input signal and get the most out of your amplier. If an instrument is plugged into both inputs both sockets behave as active inputs.
The Active inputs change the impedance and input level of the signal to compensate for modern high output bass instruments.
1. Active Input: Plug your active or high output instrument into the amplier here.
2. Mute: Use this button to mute the ampliers input (engages mute indicator LED).
3. Passive Input: Plug you non active or low output instrument in here.
4. Mute Indicator: This LED will illuminate when the input for the amplier is muted. If a signal is played while in mute mode the light will
blink to let the user know that they are trying to play while in mute mode.
5. Input Gain: Fine tune the amount of signal sent to the preamp using this control. Use in conjunction with the input gain clip indicator to
get the best performance from your amplier. When the Tube mode of the amplier is in operation the input gain controls the amount
of Tube Gain applied to the signal.
6. Input Clip Indicator: This LED will illuminate when the input signal begins to clip. If clipping occurs slowly turn the input gain control to
the left until the clip light stays off. If the amber light periodically illuminates during playing but does not change to red this indicates you are
using the maximum amount of input signal achievable into the front of the amplier.
AMBER: If the indicator illuminates amber this means you have clipped the input stage of the amplier briey but not for a
prolonged period of time. If the indicator operates only in the amber stage you are getting the maximum from the input stage of
the amplier without causing undesirable clipping to your sound.
RED: When the indicator illuminates red it will stay on for at least 1 second or if playing continues to clip the input stage. If the
indicator shows red this means that it is likely the clipping that is occurring will be detrimental to your tone and you should lower
the level using the input gain control so that the clip light only reaches the Amber level described above.
Compressor
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eden World Tour Pro Series bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eden World Tour Pro Series in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1,99 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info