773969
6
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
Mode button
Use the button to active/deactivate the auto mode
or set a timer.
Press the button to cycle through the modes:
Auto mode and Timer mode.
The selected mode icon will illuminate on the display.
Use the and buttons to change the setting. To
conrm the changes, wait for ± 3 seconds or press
the button again.
Note: If the display shows , the chosen
mode won’t activate or will be deactivated after
conrmation.
For more information on functions, see chapter
Functions.
/ Increase/decrease button
The behaviour of the increase / decrease buttons
depends on the mode that is being set.
Manual mode: Increase or decrease mist output
level.
Auto mode: Increase or decrease the desired
relative humidity level.
Timer mode: Increase or decrease the timer
with 1 hour increments.
Functions
Manual mode
In Manual mode users can select the desired mist
output.
Use the and buttons to select the desired
mist output. The mist output level bars will change
accordingly. There are three mist output levels:
Low
Medium
High
Auto mode
In Auto mode users can set the built-in hygrostat
to their desired relative humidity level. If the ambient
relative humidity drops below the desired level, the
mist output will automatically turn on. It will continue
to operate in the chosen mist output level until the
hygrostat level is reached.
Before turning on Auto mode, select the desired
mist output level in Manual mode using the and
buttons. Press the button until the indicator
illuminates on the display. Press the and
buttons to set the hygrostat to the desired relative
humidity level.
Note: The mist output level can’t be changed when
the mode is active.
10
The desired relative humidity level can be set between
40% and 90% with increments of 5%. When you go
below 40% or above 90%, the display will show
and Auto mode will be deactivated. The following
sequence shows the steps and how they cycle.
> 40% > 45% > 50% > [...] > 90% > >40%
Timer
Press the button until the indicator illuminates
on the display. Use the and buttons to
increase or decrease the timer hours in the following
sequence: 1h > 2h > 4h > 8h > OFF.
Once the timer is activated, the device will
automatically shut down after the set timer has been
completed.
Display brightness
The display will automatically dim after the last touch
or press.
Rell water indicator
When the water level becomes too low to produce
mist, the device will make three “beep”-sounds
and the display will show the red indicator in
combination with an E1 notication. Please follow the
steps explained in Filling the water tank. When the
water tank is relled you may plug in the power cord
and turn on the device.
Display notications
The following notication may show on the display:
E1: The water level in the mist chamber is too
low to produce mist.
E2: The water tank is not placed on the
humidier base .
E3: If this notication shows, please contact your
nearest service provider.
11
EN
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Duux DXHU13 Beam Mini bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Duux DXHU13 Beam Mini in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 9.3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info