10.4.5 The cutting mode
In the cutting mode, it is possible to switch between the following
parameters:
0=nocut
CA = cut after sewing
CB = cut before sewing
Keys ñò Skip with the ñò keys to field 1 “cutting mode”.
“OK”-key Press the “OK”-key.
The cursor blinks.
Keys ñò Set the desired value with the òñ keys.
“OK”-key Confirm by pressing the “OK”-key.
10.4.6 The piece counter
The buttonhole automat 580 is equipped with a piece counter that
counts the number of buttonholes sewn.
After the “å“ sign the current figure is indicated.
The value of the piece counter is memorized also when the automat is
switched off.
The piece counter can count up to 9999 buttonholes. When this figure
is reached the counter restarts at 0.
Resetting the piece counter:
keys ñò Skip with the ñò keys to field 2
“piece counter”.
“OK”-key Press the “OK”-key.
The piece counter blinks.
“OK”-key Press the “OK”-key for approx. 1.5 second.
The piece counter is set to 0 and t he display changes
back to the main level.
32
1
2
