706337
13
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
5
RECEIVER CONTROLS
The product can also be controlled using the receiver which is supplied with the product. (Fig 12)
CAS500R
is the on/standby button. Press it to turn on and off the ame effect.
is used to mute the re crackling sound. Press this to turn on and off the crackling sound. The volume can be
adjusted on the manual controls of the appliance. Please note that the mute setting will not be saved after a product
restart. The crackling sound can be turned off completely by using the volume control buttons on the button panel to
reduce the volume to its minimum setting. This minimum setting will be remembered after a product restart.
is the reduce ame button. Press this to reduce the height/intensity of your ame. You will hear an audible beep
when you reach the minimum level.
is the increase ame button. Press this to increase the height/intensity of your ame. You will hear an audible
beep when you reach the maximum level
CAS1000R
is the on/standby button. Press it to turn on and off the ame effect.
is used to mute the re crackling sound. Press this to turn on and off the crackling sound. The volume can be
adjusted on the manual controls of the appliance. Please note that the mute setting will not be saved after a product
restart. The crackling sound can be turned off completely by using the volume control buttons on the button panel to
reduce the volume to its minimum setting. This minimum setting will be remembered after a product restart.
is the reduce ame button. Press the reduce ame button on the second button row to reduce the height/intensity
of the ame on the left hand side of the product. Press the reduce ame button on the third button row to reduce
the height/intensity of the ame on the right hand side of the product. You will hear an audible beep when you reach
the minimum level.
is the increase ame button. Press the increase ame button on the second button row to increase the height/
intensity of the ame on the left hand side of the product. Press the increase ame button on the third button row to
increase the height/intensity of the ame on the right hand side of the product. You will hear an audible beep when
you reach the maximum level.
REMOTE CONTROL
The remote control is supplied with 2xAAA batteries. Remove the battery cover from the underside of the remote control
and after removing the batteries from the plastic wrapping t them into place. Replace the battery cover. With the product
powered off, a functional test can be carried out on the remote control by pushing any button and observing the blue LED
at the top o the remote ashing with each button push.
Pairing the Remote Control
The remote control has wireless Bluetooth technology and needs to be paired to the receiver. This can be done by
following the steps below.
1. Press the rocker switch to the on (I) position; a single beep will be heard.
2. Press the button on the Button Panel; the product will turn on.
3. Press the button on the Button Panel, the LED’s will start to slowly blink on and off.
4. Press the button on the remote control; the product LEDs will ash quickly three times and the product will then
automatically switch off. The remote control is now paired to the product and can be used to switch it back on.
The operation of the remote control is the same as described in ‘Receiver Controls’. You can pair multiple products to the
one remote control by repeating the pairing operation as above on your subsequent products. Please note a maximum
of six CAS500R/CAS1000R products can be paired to the one remote control.
Pairing the Remote Control to Multiple Products
If you are installing multiple CAS500R/CAS1000R products you can pair them to a single remote control. To do this,
please install the products as described in the “Installation Instructions”. Ensure that all products are connected to mains
power and have water supplied. If you are pairing CAS1000R and CAS500R products please choose the 6 button
remote control as the master remote control.
1. Pair the rst product as described in steps 1-4 above.
2. On your second product, press the rocker switch to the on (I) position; a single beep will be heard.
3. Press the button on the Button Panel; the product will turn on.
4. Press the button on the Button Panel, the LED’s will start to slowly blink on and off.
5. Press the button on the remote control; the LEDs will ash quickly three times and the product will then
automatically switch off. The remote control is now paired to the two products and can be used to switch them on.
6. Repeat the above steps to pair the next product.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dimplex CAS 1000R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dimplex CAS 1000R in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools als bijlage per email.

De handleiding is 10,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info