546142
1
Verklein
Vergroot
Pagina terug
1/25
Pagina verder
Important safety instructions to be kept with the product
Please read attentively
To prevent fire and electric shock, do not expose this receiver to rain or
moisture. In order to avoid any possible risk of electric shock, never
attempt to open the unit. In case of breakdown, reparation should be
made by qualified technicians. No part of this unit should be repaired by
users.
WARNING!
Presence of dangerous tension inside apparatus! Do not open. Risk of electric shock!
No part should be repaired by users. The maintenance of the receiver should be
carried out exclusively by qualified persons.
If the power cord is damaged, it must be replaced or repaired by the manufacturer, its
after-sales service, qualified electrician or persons of similar qualification in order to avoid
possible danger.
The product must be installed in accordance with national regulations.
The used batteries must be disposed of safely. Throw them in collection bins provided is
prohibited (inquire after your retailer for more details) in order to protect the environment.
Proper Installation
- Place the receiver on a flat, firm and stable surface. Do not put it on a carpet or rug.
-
Do not
place the receiver on top of another device, such as an amplifier. This may lead to
overheating.
- Do not put anything above the unit (for example, CDs or magazines).
Sufficient Ventilation
- Place the receiver in a well-ventilated location to prevent accumulation of internal heat.
Allow a gap of at least 10cm to the rear and the top of the unit, as well as a space of 5cm to
both sides to avoid overheating.
- Do not obstruct any ventilation openings with items such as newspapers, tablecloths,
curtains, etc.
Protecting the Receiver from High Temperatures, Humidity, Water and Dust
- The receiver should not be exposed to dripping water or splashing.
- No objects filled with liquids, such as vases, shall be placed on the unit.
- Do not place any objec
ts that might dam
age your unit near it (e.g. liquid filled objects or
candles).
- Do not place any source of flames such as lit candles on the receiver.
- This receiver is to be used in a temperate climate and should not be used in a tropical
climate.
Electricity Supply
HSILGNE
1
2
- Please unplug the receiver in case of prolonged non-use.
- If the power cord is damaged, it must be replaced or repaired by the manufacturer, its
after-sales service, qualified electrician or similar qualifications to those to avoid possible
danger.
- This device must be connected to a 240V ~ 50Hz electrical network.
- The plug must remain readily accessible after the installation of the product.
Main features
Slim size
MPEG-2, MPEG-4(H.264) decoding
USB2.0 for software update , music ,image, movie and recording
LCN(Logical Channel Number) supported;
Parental control
Favorite lists
Timer
EPG/TXT/SUBTITLE supported
Digital sound through COAXIAL output (S/PDIF)
PVR ready supported
HSILGNE
3
Contents
1. Installation of STB .............................................................................................................. 6
1.1 Front Panel ..................................................................................................................... 6
1.2 Rear Panel ..................................................................................................................... 6
1.3 Connection ..................................................................................................................... 7
2. IR .......................................................................................................................................... 9
2.1 Remote ........................................................................................................................... 9
3. Basic functions .................................................................................................................. 10
3.1 First Installation .............................................................................................................. 10
3.2 Volume adjustment and Mute ........................................................................................ 10
3.3 TV/RADIO programs switch ........................................................................................... 10
3.4 Station switch ................................................................................................................. 10
3.5 Program list .................................................................................................................... 10
3.6 Display information of programs .................................................................................... 10
3.7 Program return ............................................................................................................... 10
3.8 Audio language switch and L/R channel switch ............................................................. 11
3.9 Electronic programs guide (EPG) .................................................................................. 11
3.10 Teletext ......................................................................................................................... 11
3.11 Subtitle ......................................................................................................................... 11
3.12 REC .............................................................................................................................. 11
3.13 Time
shift ...................................................................................................................... 11
4. Installation .......................................................................................................................... 12
4.1 Auto Search .................................................................................................................. 12
4.2 Manual Search ............................................................................................................. 12
4.3 Channel Filter ............................................................................................................... 12
4.4 LCN ............................................................................................................................... 12
4.5 Country ......................................................................................................................... 12
4.6 Active Antenna ............................................................................................................. 12
5. Channel ............................................................................................................................... 13
5.1 Channel Manager ......................................................................................................... 13
5.2 Favorite List ..........................................................................................................
........ 13
6. Preference Setting ............................................................................................................. 14
6.1 OSD Language ............................................................................................................ 14
6.2 OSD Timeout ................................................................................................................ 14
HSILGNE
4
6.3 OSD Transparency ....................................................................................................... 14
6.4 Preferred Subtitle ......................................................................................................... 14
6.5 Hard Hearing ................................................................................................................ 14
6.6 Preferred Audio ............................................................................................................ 14
6.7 Multimedia .................................................................................................................... 14
6.8 PVR Config ................................................................................................................. 15
7. System Setting ................................................................................................................. 15
7.1 Timers .......................................................................................................................... 15
7.2 Child Lock .................................................................................................................... 16
7.3 Date Time ..................................................................................................................... 16
7.4 Common Interface ....................................................................................................... 16
7.5 Factory Reset ............................................................................................................... 16
7.6 Upgrade ....................................................................................................................... 16
7.7 Version ......................................................................................................................... 16
7.8 Auto Standby ................................................................................................................ 16
8. AV Setting ....................................................................................................................... 17
18
8.1 SPDIF ......................................................................................................................... 17
20
21
21
2
22
22
22
8.2 Aspect Ratio .............................................................................................................
.. 17
8.3 Video Output ...........................................................................................................
... 17
8.4 Video Resolution ....................................................................................................... 17
8.5 HDMI Audio ................................................................................................................ 17
9. OSD Game ...................................................................................................................... 17
10. Multi-Media ...................................................................................................................
10.1 MOVIE ..................................................................................................................... 18.
10.1.1 Movie file browser .........................................................................................................
18
.
10.1.2 Movie playback ...........................................................................................................
18
10.2 MUSIC ..................................................................................................................... 19.
10.3 PHOTO .................................................................................................................... 19
10.3.1 Photo file browser .......................................................................................................
19
10.3.2 Photo playback ...........................................................................................................
10.3.3 Photo thumbnail .........................................................................................................
20
10.4 NATIVE32 GAME ....................................................................................................
20
10.5 RECORDER MANAGER .........................................................................................
10.5.1 Recorder manager browser ........................................................................................
10.6 DISK MANAGER .....................................................................................................
1
10.6.1 Disk manager browser ................................................................................................
10.6.2 Move/Copy ..................................................................................................................
10.7 E-Book .....................................................................................................................
HSILGNE
5
10.7.1 E-Book browser ..........................................................................................................
10.8 ISO............................................................................................................................ 22
22
11. Upgrade ......................................................................................................................... 23
11.1 USB Upgrade ........................................................................................................... 23
12. Troubleshooting ............................................................................................................ 24
HSILGNE
1. Installation of STB
1.1 Front Panel
1
: Switch between Standby mode and active mode.
2 CH-: Down channel
3 CH+: Up channel
4 On/off:
Power lamp, red color in Standby mode, green color in active mode
5 IR : Receives the remote control signal
6 LED: Display the state and the channel number
1.2 Rear Panel
1. RF IN
Connect cable signal.
2. RF OUT
To connect to TV.
3. HDMI
Connecting to the HDMI input on the TV set.
HSILGNE
6
7
4.TV SCART Connector
Use this connector to connect your receiver to your video recorder using a SCART cable.
Your video signal will now be looped through your receiver to your TV set.
5. SCART VCR
Connect the external video input
6. S/PDIF
Digital audio signal output
7.CI
Insert CI module and Smart Card into CI slot, to decode pay tv programs
8. USB
It is used for playing media and PVR
USB harddisc on products with PVR function.
Please notice that we recommend using a hard disc with OWN power supply on this
unit. This is to ensure that it has enough power to work properly.
You can buy many hard discs without power supply, but our experience is that they
need too much power to work stable. MAXIMUM power for hard discs without
power supply is
500mAh.. If they use m
ore than this, they will fail when recording.
9. Power Cord
1.3 Connection
Note: Before connect this STB to other devices, please close all devices’ power.
1.3.1 Connecting to cable signal
To receive the broadcast signal, the cable signal should be connected to the CABLE IN
HSILGNE
8
connector at the back of the receiver.
1.3.2 Connecting to TV
1. Connect the scart connectors at the back of the receiver to the scart connectors on
your TV set.
2. Connect the HDMI connector at the back of the receiver to the HDMI connector on
your TV set.
1.3.3 Connecting to Digital Audio Amplifier
Connect OPTICAL connector at the back of your receiver to appropriated input of your
Digital Audio
HSILGNE
9
2. IR
2.1 Remote
1STANDBY switch of power supply
2RECALLreturn to upper menu or previous program palyed.
3AUDIO audio pid switch and left/right channel
4MUTE mute control
5TV/RADIO TV/RADIO switch
6FAV enter channel/Fav list
7TEXT Teletext
8EPG go to EPG
9INFODisplay information of programs
10SUB Subtitle
11MENU Enter main menu
12CH+/- left/right channel
13RETURN/EXIT Exit to the menu or escape from the item
14VOL/-』 volume adjusting
15
/ / / & OK move high_light and confirm
16PAGE UP&DOWN Page up&down
17NUMBER digital strokes
18REC enter REC
19DTV/VCRswitch DTV to VCR
20USB Into USB menu
21PLAY/PAUSE play/pause key
22STOP stop playing USB Media
23REPEAT set repeat mode
24PREV & NEXT play previous&next USB Media
24REV & FWD speed up&down while USB Media playing
25COLOURUse to navigate between pages in teletext mode.
HSILGNE
10
3. Basic functions
3.1 First Installation
First installation shall setup some important
configures.
User can select OSD LanguageCountryTime Zone
Active Antenna and LCN from this menuwhen it is
set completelyUser can use “Start Search”to search
channels.
3.2 Volume adjustment and Mute
1. Press “vol+/-” to adjust volume when system is in normal playing mode; and it will show
volume bar on the image.
2. Press “MUTE” to enter into the mode when normally playing and repress “MUTE” to back
the normal state.
3.3 TV/RADIO programs switch
Press “TV/RADIO” to switch the programs when it is in full screen.
3.4 Station switch
1. Press “CH+/-” to switch to the next or previous
program.
2. Press number keys to input program number.
3.5 Program list
1. Press “ENTER” to switch to the program list, press “LEFT/RIGHT to select different
program class; press “UP/DOWN” to select program.
2.If there are some favorite programs that been set up, just press “FAV” key to enter into the
favorite program list:
3.6 Display information of programs
Press key “INFO” to show the information of current programs when it is in normal
playing state.
3.7 Program return
Press “RECALL” under state of full-screen to return to the previous program palyed.
HSILGNE
11
3.8 Audio language switch and L/R channel switch
Press “AUDIO” key to switch the language of sound of current programs and switch among
“stereo”
“left” “right”(stereo left channel right channel).
3.9 Electronic programs guide (EPG)
1. You can press key “EPG” on the remote controller to enter into the EPG page to know
more about the programs to be played.
2. Press the colour key to choose the detailed information corresponding to the current
program.
3.10 Teletext
Press “TEXT” on the remote to enter into Teletext page.
3.11 Subtitle
Press SUBTITLE key on the remote to enter the Subtitle menu for selecting subtitle
on/off/language.
3.12 REC
Press “REC” key to record current program. You can press “info” key to watch current
recording information.
Press “stop” key while recording, will stop record and resume normal playback mode
.
3.13 Time shift
1) In TV full screen, Press Pause key to into time shift mode.
2) In time shift mode, User can use PLAY/PAUSE/Fast forward/Fast backward.
HSILGNE
12
4. Installation
Please input its password (0000) when entering into installation menu each time.
4.1 Auto Search
Auto search will scan all frequency and all programs based on your country setting.
4.2 Manual Search
Manual Search is for someone who know about how to select the exact frequency to scan.
4.3 Channel Filter
All channels or only unencrypted channels are set to be searched by selective settings.
4.4 LCN
LCN Mode can control the channel whether sort by the sequence information in the streams
4.5 Country
Use can set country
4.6 Active Antenna
Enables/Disables the “Active Antenna”
HSILGNE
13
5. Channel
5.1 Channel Manager
Channel manager page includes channel deleting, moving, locking and rename.
5.2 Favorite List
1. As shown in the figure below via “Main menu->channel-> Favorite list”
2. User can set channel favorite list.
HSILGNE
14
6. Preference Setting
6.1 OSD Language
User can select OSD language
6.2 OSD Tiemeout
User can select OSD Timeout
6.3 OSD Transparency
User can adjust OSD Transparency
6.4 Preferred Subtitle
User can set 1
st
and “2
nd
Preferred subtitle language.
6.5 Hard Hearing
Enables/Disables the “hearing impaired”
6.6 Preferred Audio
User can set 1
st
and “2
nd
Preferred audio language.
6.7 Multimedia
User can setting for media player.
HSILGNE
15
6.8 PVR Config
It contains six options as fallow
1
PVR File Format
Either of options, TS/PS
2
File Size
Any of options, 4G/3G/2G/1G, can be selected to set the size of the file to be recorded
3
Timeshift
Any of options, AUTO/OFF/ PAUSE, if AUTO is selected, timeshift operation will perform
automatically on the background, if OFF is selected, timesshift operation will stop; if
PAUSE is selected, timeshift operation will be Manual start by Pause key
4
Timeshift Length
Any of options, AUTO/30min/1h/2h, can be selected to set the time depth of the timeshift
5
Timeshift to Record
Either of options, ON/OFF, can be selected.
7. System Setting
7.1 Timers
10 timers are supported. Setting for timer:
HSILGNE
16
DateSpecifies the timer date
Program NameSpecifies the channel for which the timer is set
Start timeSpecifies the start time of the timer
End timeSpecifies the end time of the timerbe used in Recorder Type
DurationSpecifies the duration time of the timerbe used in Recorder Type
ModeSpecifies the frequency of the timer. Duration can be any of the following
Once -timer will be triggered only once.
Daily -timer will be triggered daily at the specified time.
Weekly -timer will be triggered every week at the specified time.
Monthly- timer will be triggered every Monthly at the specified time.
7.2 Child Lock
User can set Enables or Disables the system lock, and also can set the parental rating
from 0 to 18.
7.3 Date Time
If the “Time Mode” is set to “Auto” then, “Time Zone” and “DST” shall be active for
editing. If the Mode is “Manual”, these options shall be disabled.
If the “Time Mode” is set to “Manual” then, “Date” and “Time” shall be active for editing.
If the Mode is “Auto”, these options shall be disabled.
7.4 Common Interface
Information about common interface
7.5 Factory Reset
There will be Reset to default when this option be selected. The system will hint to input
“0000”; to set factory Reset
7.6 Upgrade
Software Upgrade
7.7 Version
Information about the stb
7.8 Auto Standby
Control the STB to standby automatically after any comportment for 3 hours.
HSILGNE
17
8. AV Setting
TV setup provides convenient TV input mode, as shown in Figure
8.1 SPDIF
Used to select AVC mode –MutePCM and Bitstream
8.2 Aspect Ratio
Aspect Ratio can be set as 16: 9, 4: 3PanScan, 4: 3LetterBoxFull Screen
8.3 Video Output
Video Output can be set as RGB, CVBS;
8.4 Video Resolution
Video Resolution can be set as 480p_60,480i_30,576p_50,576i_25, 720p-60, 720p_50,
1080i_30, 1080i_25, 1080p_60, 1080p_50;Auto Detect
8.5 HDMI Audio
HDMI Audio can be set HDMI PCM HDMI RAW HDMI Mute;
9. OSD Game
Four OSD games are provided include Box ManTetrisHit RatGo Bang .
HSILGNE
18
10. Multi-Media
10.1 MOVIE
10.1.1 Movie file browser
Supported file formats are MPG, AVI, VOB, DAT, ASF, MKV, RM, WMV, TS, QT.
10.1.2 Movie playback
Key Stroke Action
KEY_PREV Shall stop this movie and play the previous movie in the list.
KEY_NEXT Shall stop this movie and play the next movie in the list.
KEY_PLAY play movie and show play icon.
KEY_PAUSE If the movie is playing, then this will pause and show pause icon
KEY_STOP Stop the movie and show the layout
KEY_FWD Fast forward the movie.
KEY_REV Fast reverse the movie.
KEY_RECALL The same as the key KEY_STOP
KEY_MUTE TV mute shall be toggled.
KEY_VOLUME Change the volume
KEY_INFO Display information of the playing movie
HSILGNE
19
10.2 MUSIC
WMA, WAV, AAC,and MP3 format will be supported.
Key Stroke Action
KEY_PREV play the previous music
KEY_NEXT play the next music
KEY_PLAY play current music
KEY_PAUSE pause music
KEY_STOP stop the music
KEY_FWD fast forward the music
KEY_REV fast reverse the music
KEY_NUM
the highlight shall change to the corresponding item according
to the input number.
10.3 PHOTO
10.3.1 Photo file browser
Supported file formats are JPG, TIF, PNG, GIF and BMP.
HSILGNE
20
Key Stroke Action
KEY_ENTER press the key will play the selected photo.
KEY_RECALL
press KEY_RECALL shall return from file list to filter selection
mode.
KEY_NUM
the highlight shall change to the corresponding item according
to the input number
KEY_YELLOW Shall show thumbnail menu.
10.3.2 Photo playback
Key Stroke Action
KEY_UP Shall rotate the image 180
KEY_DOWN Shall rotate the image 180
KEY_LEFT Shall rotate the image 270
KEY_RIGHT Shall rotate thr image 90
KEY_PREV
Displays the previous image in the List. If the displayed image is
the first one then the key is ignored.
KEY_NEXT
Displays the next image in the List. If the displayed image is the
last one then the key is ignored.
KEY_INFO Shall display the information of the image
KEY_PAUSE Slide show was paused if press the key
KEY_PLAY Slide show was start to play if press the key
10.3.3 Photo thumbnail
The thumbnail view of the photos.
10.4 NATIVE32 GAME
Supported file formats are native32.
HSILGNE
21
Key Stroke Action
KEY_ENTER press the key will play the selected game.
KEY_RECALL
press KEY_RECALL shall return from file list to the filter
selection mode.
KEY_NUM
the highlight shall change to the corresponding item according
to the input number
KEY_RED Change the type of game from native32 to NES
10.5 RECORDER MANAGER
10.5.1 Recorder manager browser
Key Stroke Action
KEY_ENTER press the key will play the selected recorded program
KEY_RECALL
press KEY_RECALL shall return from file list to the filter
selection mode
KEY_RED press it will delete the selected item
KEY_GREEN press it will rename the selected item.
KEY_YELLOW press it will show list files of type
KEY_BLUE delete all
10.6 DISK MANAGER
HSILGNE
22
10.6.1 Disk manager browser
Key Stroke Action
KEY_RED Show move/copy menu
KEY_GREEN Show rename menu.
KEY_YELLOW Delete the selected item
10.6.2 Move/Copy
In Move/copy menu user can move file or folder from one side to other side. It also can
copy the content at one side to other side.
10.7 E-Book
10.7.1 E-Book browser
User can read e-book in *.txt file.
10.8 ISO
Supported file formats are ISO.
Key Stroke Action
KEY_PREV Shall stop this ISO and play the previous ISO in the list.
KEY_NEXT Shall stop this ISO and play the next ISO in the list.
KEY_PLAY play ISO and show play icon.
KEY_PAUSE If the ISO is playing, then this will pause and show pause icon
HSILGNE
23
KEY_STOP Stop the ISO and show the layout
KEY_FWD Fast forward the ISO.
KEY_REV Fast reverse the ISO.
KEY_RED
Switch to Zoom function,you can press KEY_REV and
KEY_FWD to zoom in and zoom outt
11. Upgrade
11.1 USB Upgrade
User copy the upgrade file into the USB device and plug into the device for software
upgrade.
USB upgrade flow:
Insert contain upgrade file u-disk, press(menu -> setting -> upgrade -> usb
upgrade) enter USB directory list page, as show in the figure below:
Select upgrade file and press “enter” key to start upgrade, enter upgrade page show
information to prompt user upgrade progress;
The whole process of USB upgrade maybe need 30 second;
Please make sure don’t shut down the power in upgrade process;
When upgrade finish, system will automatic restart with the new fireware;
HSILGNE
24
12. Troubleshooting
There may be various reasons for the abnormal operation of the receiver. Check the receiver
according to the procedures shown below. If the receiver does not work properly after checking it,
please contact the dealer. Don’t open the receiver cover. This may cause a dangerous situation.
Symptom Cause Remedy
The LED display
on front panel
does not light up.
The power cord is not
plugged in.
Check that the power cord is
plugged in to the wall outlet.
No picture or
sound
Wrong connection of
the Audio/ Video
output of the receiver
to TV. Audio muting.
TV power off.
Connect the Audio/ Video output
of the receiver to TV correctly.
Press the MUTE button Turn TV
on.
No picture The receiver can’t
receive the signal
Incorrect values of
some tuner
parameters Wrong
direction of the
antenna.
Check the antenna cable, replace
the cable, or connect the cable to
the receiver tightly. Set the values
of the tuner parameters correctly
in the installation menu. Check
the antenna connect.
The remote control
does not work
The batteries of the
remote control are not
inserted or exhausted
Check whether the batteries are
inserted correctly in your remote
control. Check the batteries, and
if exhausted replace the batteries
in the remote control.
Tips If you refer to this troubleshooting, but no resolve that problem you encountered. Please you
contact the local dealer or technical support instantly, don’t to discover the machine, because that do is very
danger, and it damage that machine in that cases.
HSILGNE
25
Electric and electronic equipment and included batteries contains materials, components
and substances that can be hazardous to your health and the
environment, if the waste material (discarded electric and electronic
equipment and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the
crossed out trash can symbol, seen below. This symbol signifies that electric and
electronic equipment and batteries should not be disposed of with other household
waste, but should be disposed of separately.
As the end user it is important that you submit your used batteries to the approriate and
designated facility. In this manner you make sure that the batteries are recycled in
accordance
with leg
islature and will not harm the environment.
All cities have established collection points, where electric and electronic equipment and
batteries can either be submitted free of charge at recycling stations and other collection
sites, or be collected from the households. Additional information is available at the
technical department of your city.
Importer: DENVER ELECTRONICS A/S Stavneagervej 22 DK-8250 EGAA DENMARK
ALL RIGHTS RESERVED:
COPYRIGHT DENVER ELECTRONICS A/S
www.denver-electronics.com
www.facebook.com/denverelectronics
HSILGNE
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Denver DMB-119CI bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Denver DMB-119CI in de taal/talen: Engels als bijlage per email.

De handleiding is 0,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Denver DMB-119CI

Denver DMB-119CI Gebruiksaanwijzing - Deutsch - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info