19
Operation
Tuning in DAB (Digital Audio
Broadcasting) broadcasts
1
Press the ON/STANDBY switch or POWER ON
button
to turn on the power.
2
Watching the display, press the BAND button
to select the desired band (DAB).
3
Watching the display, press the AUTO TUNE or
AUTO PRESET/AUTO TUNE button to start automa
tically scanning.
Tune in the first
broadcast station.
Press the button and release it in less than 2 seconds
to perform a local scan (UK band
III).
(UK stations are in the range 11B to 12D) ( page 27).
Press the button for over 2 seconds then release it to
perform the full scan operation (Full band
III and L-
band: 5A to LW) ( page 27).
Once auto scanning is completed, the number of
broadcast stations is displayed, then the first station is
tuned in.
If “Station not available” is displayed, check the
antenna’s connection ( page 8).
You may want to re-tune at a later date if you move the
TU-1800DAB or if you want to receive a newly
introduced ensemble.
Press the AUTO TUNE or AUTO PRESET/AUTO TUNE
button.
Using the DAB for the first time
When you first switch on the unit and select DAB, the
Auto Tuning function scans the Band
III and L–band
frequencies. After the scanning, the first scanned
component will be selected.
4
Either turn the TUNING/PRESET knob or
press the
CHANNEL/CONTROL button to select
the station.
• If the station you select is in stereo, the “STEREO”
indicator will light up.
About secondary service
When receiving a Secondary service, “<< >>” are
indicated to the right of “Channel and Frequency”.
When either the TUNING/PRESET knob or ENTER button
is pressed, the Secondary service Component is
received and the Secondary indicator lights.
Press TUNING/PRESET knob or ENTER button to go back
to the primary service again.
5
Press the TUNING/PRESET knob or press the
ENTER button to listen to the selected station.
• After “Now tuning…” is displayed, the tuned in
station appears.
