12
ENGLISH
Next Track playback start
t When the
PLAY/PAUSE button is
pushed, the current
playback is stopped
and playback of the
next track starts.
✽ The currently playing track can be faded
out when starting to play a different
track. The fade out time can be selected
at
⁄5 PRESET “(2) Next Track”.
• If the PLAY/PAUSE button is not
pushed after standing by at the next
track, when in the CONT. playback
mode, playback of the next track starts
once all of the currently playing
playback data has been played.
The same goes for SINGLE playback
mode.
Relay playback
• Relay Play function is a playback mode to continue
play tracks of CD1 and CD2 in DN-D6000.
1
RELAY PLAY ON
q When “Relay. ON” is selected for
⁄5
PRESET “(14) Relay Mode” and playback
starts, RELAY PLAY starts.
• If RELAY MODE is selected with
PRESET of one side. RELAY PLAY will be
operated with CD1 and CD2.
• When RELAY MODE is selected,
“SINGLE” or “CONT.” display flashes.
• In the single play mode, when the one
player’s playback reaches end of track,
another player starts playing.
• In the continuous play mode, when the
whole tracks on one side are finished,
another player starts.
• The discs in CD1 and CD2 can be played
alternately.
✽ The CD1 and CD2 can be played
overlapping. The overlap playback time
can be selected at
⁄5
PRESET “(2) Next
Track”.
2
RELAY PLAY OFF
w Stop playback and select “Relay. OFF” is
selected for
⁄5
PRESET “(14) Relay
Mode”.
6
NEXT TRACK
• It's now possible to select the beginning of the next track to be played while continuing playback of the current
track without interrupting playback.
*Crossfade can also be used for a smooth transition.
3
Track search start
r When the CUE button is
pushed after selecting the
track, current playback
continues as the next track
is searched for and the
standby mode is set. When
the standby mode is set,
the CUE button lights up
and the PLAY/PAUSE
button flashes.
• During this time, if a loop of 8 seconds
or less is actively looping, it will continue
to loop until PLAY is ultimately pressed.
If a loop is over 8 sec, you must first
EXIT from the loop in order to enter
Next Tr mode.
• The time display indicates the
remaining playback time for data in the
memory after CUE is pressed.
NOTE:
The amount of time for which
playback of the currently continuing
track can be continued is a maximum
of 10 seconds from the time
searching for the next track starts.
1
Enter Next Track mode
q When the NEXT TR./B TRIM
button is pushed during
playback, the NEXT TRACK
function is turned on.
• When this mode is set, CUE
button blink.
• When the button is pushed again, the
NEXT TRACK mode is turned off.
• However, when seamless loop point B
is set, the point B trim mode is
selected. In this case press the button
again to turn the trim mode off.
2-1
Select the track
w Turn the PARAMETERS
knob and select for the
next track to be played.
2-2
Select the MEMO
e The CUE point of MEMO can
be selected as NEXT TRACK.
• When the NEXT TRACK with which
MEMO is memorized is selected,
“MEMO“ is displayed on the character
display.
• If the MEMO button is pushed at this
time, the CUE point is memorized as
the NEXT TRACK & point to be
selected.
• The MEMO will be canceled if another
track is selected by PARAMETERS
knob or the MEMO button is pushed
again.
4
