546638
21
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
21
ENGLISH
Check for misalignment and seizure of moving
parts, breakage of parts and any other conditions
that may affect its operation. Have damaged
guards or other defective parts repaired or
replaced as instructed. Do not use the tool if the
switch is defective. Have the switch replaced by
an authorized DEWALT repair agent.
20 Have your tool repaired by an authorized
DEWALT repair agent
This Power Tool is in accordance with the
relevant safety regulations. To avoid danger,
electric appliances must only be repaired by
qualified technicians.
Additional safety rules for alligator saws
Do not expose the power tool to
humidity.
Do not use the power tool if the mains
cable is damaged.
Plugging into the mains, switching on and off
Always ensure that the alligator saw is switched
off before plugging into the mains.
After switching off, never attempt to stop the saw
blades with your fingers.
Never put the saw down on a table or work bench
unless switched off. The saw blades will keep running
briefly after the machine has been switched off.
When sawing
Remove all nails and metal objects from the
workpiece before starting work.
Wherever possible, use clamps and vices to
fasten the workpiece securely.
Do not attempt to saw extremely small workpieces.
Do not bend too far forward. Make sure that you
always stand firmly, particularly on scaffolding
and ladders.
Always hold the saw with both hands.
Do not use the saw for cutting curves and pockets.
Checking and changing the saw blades
Unplug the tool before cleaning or changing the
saw blades.
Only use DEWALT saw blades conforming to the
specifications contained in these operating
instructions.
Only sharp saw blades in perfect working
condition should be used; cracked or bent saw
blades should be discarded and replaced at once.
Correct use
Use the correct type of saw blades: yellow for
cellular concrete and plaster board, black for
thermal building blocks.
Switch the tool on before sawing.
Do not exert pressure or rock the tool while sawing.
Keep the tool running while taking the tool from
the workpiece.
On a daily basis, clean the saw blades and bar.
On a daily basis, tighten the saw blade screws.
Package contents
The package contains:
1 Alligator saw with
1 TCT saw blade set for cellular concrete and
plaster board (DW392)
1 TCT saw blade set for thermal building blocks
(DW393)
1 TCT saw blade set for Poroton building blocks
(DW394)
1 Saw blade guard
2 Side handles with fixing screws
1 Allen key
1 Cutting slot scraper
1 Instruction manual
1 Exploded drawing
Check for damage to the tool, parts or accessories
which may have occurred during transport.
Take the time to thoroughly read and understand
this manual prior to operation.
Description (fig. A)
Your DEWALT alligator saw DW392/DW393/DW394
is a versatile power tool that has been designed for
professional sawing applications.
DW392: Cutting of cellular concrete
(specific density up to G 2+4) and plaster board.
DW393: Cutting of thermal building blocks
(specific density up to 1.2)
DW394: Cutting of Poroton building blocks
(up to class 20)
1 On/off-switch
2 Lock-off button
3 Front handle
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DeWalt DW394 T 4 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DeWalt DW394 T 4 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 0,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info