562616
13
Verklein
Vergroot
Pagina terug
1/17
Pagina verder
19
Perno
Supporto
spout. The descale programme automatically
performs a series of rinses and pauses to
remove limescale deposits from inside the
machine.
After about 30 minutes, the message “RINSING...
FILL TANK!” is displayed.
9. The appliance is now ready for rinsing with
clean water.
Remove the water tank, empty, rinse
under running water, fill with clean water
and replace. “RINSING... PRESS OK” is
displayed.
10. Empty the container used to collect the
descaler solution and replace it under the hot
water spout.
11. Press the OK button to start rinsing. Hot
water flows out of the spout and the message
“RINSING...” is displayed.
12. When the water tank is completely empty,
the message “RINSING COMPLETE... PRESS
OK” is displayed.
13. Press the OK button, fill the water tank and
the appliance is ready for use.
SETTING WATER HARDNESS
The DESCALE message is displayed after a
period of time established according to water
hardness.
The machine is factory set for a hardness value
of 4. The machine can also be programmed
according to the hardness of the mains water in
the various regions, varying the frequency with
which the message is displayed.
Measuring water hardness
1. Remove the “TOTAL HARDNESS TEST”
indicator paper from its pack.
2. Immerse the paper completely in a glass of
water for one second.
3. After about a minute, 1, 2, 3, or 4 red squares
form, depending on the hardness of the water.
Each square corresponds to one level.
Level 1
Level 2
Level 3
Level 4
Set water hardness
1. Press the P button to enter the menu.
2. Press the button (corresponding to
the symbol flashing on the display)
repeatedly until the menu arrow is on
“WATER HARDNESS”.
3. Confirm the selection by pressing the OK
button.
4. Press the button (corresponding to the
SET symbol flashing on the display) until the
number displayed coincides with the number
of red squares on the test strip.
5. Press the OK button to confirm the setting.
6. Press the P button (corresponding to the
ESC symbol flashing on the display) to exit
programming mode or to change other
parameters.
The machine is now reprogrammed with the new
water hardness setting.
SETTING THE LANGUAGE
To change the language on the display, proceed
as follows:
• PresstheOK button for at least 5 seconds
until the appliance displays the installation
message in various languages.
• Whenthelanguagerequiredappears,press
OK for 3 seconds.
TECHNICAL SPECIFICATION
Voltage: 220-240 V~ 50/60 Hz max. 10A
Absorbed power: 1350W
Pressure: 15 bars
Water tank capacity: 1,8 litres
Size LxHxD: 282x374x441 mm
Weight: 11,4 Kg
The appliance complies with the following EC
directives:
• “Low voltage Directive” 2006/95/CE and
suc¬cessive amendments.
• “EMC Directive” EMC 2004/108/CE and
successive amendments.
• The materials and objects destined to
come into contact with food stuffs are
in compliance with the provisions of the
1935/2004 European Standard.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DeLonghi ESAM 6650 PRIMADONNA bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DeLonghi ESAM 6650 PRIMADONNA in de taal/talen: Engels als bijlage per email.

De handleiding is 1,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van DeLonghi ESAM 6650 PRIMADONNA

DeLonghi ESAM 6650 PRIMADONNA Gebruiksaanwijzing - Nederlands - 15 pagina's

DeLonghi ESAM 6650 PRIMADONNA Gebruiksaanwijzing - Deutsch - 23 pagina's

DeLonghi ESAM 6650 PRIMADONNA Gebruiksaanwijzing - Français - 15 pagina's

DeLonghi ESAM 6650 PRIMADONNA Snelstart handleiding - Alle talen - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info