39
Installing your hob in all simplicity
Changing the type of gas supply (cont'd)
When carrying out this operation, you
should successively:
➊
Adapt the gas connection
❷
Change the injectors
❸
Adjust the retarder on the taps
➊
ADAPT THE HOB CONNECTION to the
new gas adjustment. Refer to the pa-
ragraph “Gas connections”.
❷
CHANGE THE INJECTORS in the follo-
wing way:
•
Remove the supports, and all the
burner caps and heads.
•
Using the spanner supplied, uns-
crew the injectors at the bottom of ea-
ch dish and remove them (fig 1).
•
Replace these with the injectors
supplied in the wallet, in accordan-
ce with the gas rating table at the
end of the chapter; to do this:
➪ Screw in the injectors by hand
until they are tight.
➪ Put the spanner well onto the
injector.
➪ With a pencil draw a line on the
hearth plate as indicated (fig. 2).
➪ Turn the spanner clockwise
until the line appears on the
other side (fig. 3). Warning!
Do not go beyond this limit
as you are
liable to cause damage.
➪ Put all the burners, covers and grills
back in position.
Spanner
Spanner
Line
Line
Fig. 3
Fig. 2
Cover
Head
Dish
Grill
Glass top
Fig. 1
● Changing from butane / propane gas
to natural gas or air-propane / air-
butane.
