38
Installing your hob in all simplicity
Changing the type of gas supply (cont'd)
❸
ADJUST THE RETARDER ON THE TAPS
located under the knobs. Proceed as
follows:
•
Work on one tap at a time.
•
Remove the control knobs by pul-
ling them upwards.
•
Using a small screwdriver screw
fully the brass, adjustment screw
(yellow) (Fig. 4) clockwise.
•
Check the position of the knobs be-
fore putting them back in place. Make
sure the knobs are pushed down as
far as possible.
•
Put all the burners, covers and grills
back in position.
● Changing from natural gas to
butane/propane gas (cont'd).
Adjustment
screw
Tap axis
Fig. 4