SYSTEM CONNECTION
4
• Remove the aerial lead from your TV and connect this to
the TV AERIAL input socket on the STB.
• Connect a SCART cable between the main SCART socket
on the TV and the TV SCART socket on the STB.
• Switch on your TV, plug in and switch on your STB.
You may need to select the AV (SCART) input on your TV
to watch Digital TV. In some cases your TV will
automatically select this input when the STB is switched
on.
Connecting to the TV with SCART
Antenna
RF cable
Scart cable
You can connect an RCA/Cinch single cable from the
DIGITAL AUDIO socket on the STB to a HiFi system
equipped with digital audio input. This output is also used for
connection to an external Dolby digital decoder.
Connecting a Amplifier/Receiver system
Amplifier/Receiver
Coaxial cable
• To avoid interference you must use screened audio cables.
• Never connect digital output to any analogue input.
• It is always advisable to consult your HiFi instruction book.
NOTE
DSD-800M_UK_2007 2007.10.2 5:54 PM ˘ ` 4 mac001 1200DPI 90LPI