810366
353
Verklein
Vergroot
Pagina terug
1/396
Pagina verder
Wheels and tyres
351
Tyre pressure monitor system
ment panel through a warning lamp and a
warning to the driver ›››Fig.229. When only
one specic tyre is aected, its position within
the vehicle will be indicated.
Loss of pressure: Check left tyre
pressure!
Wheel tread change
The wheel diameter changes when:
Tyre pressure is changed manually.
Tyre pressure is insuicient.
The tyre structure is damaged.
The vehicle is unbalanced because of a load.
The wheels on an axle are subject to a heav-
ier load (e.g. with a heavy load).
The vehicle is tted with snow chains.
The temporary spare wheel is tted.
The wheel on one axle is changed.
There may be a delay in the reaction of the tyre
pressure monitoring indicator or it may not
indicate anything under certain circumstances
(e.g. sporty driving, snow-covered or unpaved
roads, or when driving with snow chains).
Calibrate the tyre pressure monitoring indi-
cator
After changing the tyre pressure or replacing
one or more wheels, the tyre pressure moni-
toring indicator must be recalibrated. Do the
same, for example, when the front and rear
wheels are swapped.
It should be calibrated with the vehicle stop-
ped and its tyres cold. If calibrated while the
tyres are hot, the pressure check and calibra-
tion procedure should be repeated when cold
before the next trip.
Switch the ignition on.
Memorise the new ination pressure in the
Infotainment system: function button >
Vehicle info > Vehicle status ›››page34.
OR: through the Service menu on the in-
strument cluster ›››page28.
The tyre pressure loss indicator uses the ABS
sensors to compare the turns of each wheel
and, therefore, their tread circumferences,
among other aspects. After a long journey with
varied speeds the programmed values are col-
lected and monitored.
With the wheels under very heavy loads, the
tyre pressure must be increased to the total
recommended tyre pressure before the cali-
bration ›››Fig.229.
WARNING
When the tyres are inated at dierent pres-
sures or at a pressure that is too low then a
tyre may be damaged resulting in a loss of
control of the vehicle and a serious or fatal
accident.
If the lamp lights up, reduce speed im-
mediately and avoid any sudden turning or
braking manoeuvres. Stop when possible,
and check the tyre pressure and status.
The tyre pressure loss indicator only works
correctly if all the tyres are at the correct
pressure when cold, and it is subsequently
calibrated according to the described proce-
dure.
If a tyre has not been punctured and it does
not have to be changed immediately, drive to
the nearest specialised workshop at a mod-
erate speed and have the tyre checked and
inated to the correct pressure.
Note
Driving for the rst time with new tyres at
a high speed can cause them to slightly ex-
pand, which could then produce an air pres-
sure warning.
If excessively low tyre pressure is detected
with the ignition on, an audible warning will
sound. In the event that there is a fault in the
system, an audible warning will sound.
353

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cupra Formentor - 2022 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cupra Formentor - 2022 in de taal/talen: Engels als bijlage per email.

De handleiding is 7.81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Cupra Formentor - 2022

Cupra Formentor - 2022 Gebruiksaanwijzing - Nederlands - 424 pagina's

Cupra Formentor - 2022 Gebruiksaanwijzing - Deutsch - 415 pagina's

Cupra Formentor - 2022 Gebruiksaanwijzing - Français - 436 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info