810366
350
Verklein
Vergroot
Pagina terug
1/396
Pagina verder
348
Wheels and tyres
Loosening wheel nuts
Fig.226 T
yre change: slacken the wheel
bolts.
Use only the wheel wrench belonging to the
car to loosen the wheel bolts.
Loosen the wheel bolts only about one turn
before raising the vehicle with the jack.
If the wheel bolt is very tight, carefully push on
the end of the wheel wrench with your foot.
Hold on to the vehicle for support and take
care not to slip during this operation.
Loosening wheel nuts
Fit the box spanner into the bolt as far as it
will go ›››Fig.226.
Hold the wrench at the end and rotate
the bolt approximately one turn anticlock-
wise››› .
Important information about wheel bolts
Factory-tted rims and wheel bolts are spe-
cially matched during construction. Therefore,
if dierent rims are tted, the correct wheel
bolts with the right length and heads must
be used. This ensures that wheels are tted
securely and that the brake system functions
correctly.
In certain circumstances, you should not even
use wheel bolts from vehicles of the same
model.
WARNING
If the wheel bolts are not properly tightened,
they could come loose while driving and
cause an accident, serious injury and loss of
vehicle control.
Use only wheel bolts which correspond to
the rim in question.
Never use dierent wheel bolts.
Wheel bolts and threads should be clean,
free of oil and grease, and it should be possi-
ble to screw them easily.
To loosen and tighten wheel bolts, only
use the wheel wrench that came with the car
from the factory.
The wheel bolts should only be loosened
slightly (about one turn) before raising the
vehicle with the jack. Risk of accident!
Never apply grease or oil to wheel bolts or
to the wheel hub threads. Even if the bolts
have been tightened to the prescribed tor-
que, they could come loose while driving.
Never loosen the screwed joints of wheel
rims with bolted ring trims.
If wheel bolts are tightened below the
prescribed torque, the bolts and rims could
come loose while driving. If tightening torque
is too high, the wheel bolts or threads can be
damaged.
Raise the vehicle
Fig.227 Jack position points.
350

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cupra Formentor - 2022 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cupra Formentor - 2022 in de taal/talen: Engels als bijlage per email.

De handleiding is 7.81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Cupra Formentor - 2022

Cupra Formentor - 2022 Gebruiksaanwijzing - Nederlands - 424 pagina's

Cupra Formentor - 2022 Gebruiksaanwijzing - Deutsch - 415 pagina's

Cupra Formentor - 2022 Gebruiksaanwijzing - Français - 436 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info