WATERPROOFING INFORMATION
■
You have just acquired a mobile phone that meets the IP68 standard. To ensure
its optimal use and waterproofing, make sure that all the caps over openings as
well as the cover are closed properly.
■
Do not open the device’s back cover if it is in water or a very humid environment.
■
The rubber seal fixed on the cover is an important component of the device.
Take care when opening and closing the cover to avoid damaging the rubber
seal. Ensure that the seal is free from any debris, such as sand or dust, to avoid
damaging the device.
■
The cover and the caps over openings may become loose from falling or shocks.
■
Make sure that all the covers are properly aligned and perfectly closed.
■
If the device has been submerged in water or the microphone or speaker is
wet, the sound may not be clear during a call. Ensure that the microphone or
speaker is clean and dry by wiping it with a dry cloth.
■
If the device gets wet, dry it thoroughly with a soft, clean cloth.
■
The waterproofness of the device may result in slight vibrations in certain
conditions. Such vibrations, for example when the volume is turned up high, are
entirely and do not aect the performance of the device.
■
Do not disassemble or use any equipment which may damage the waterproof
film of the microphone or speakers.
■
Temperature fluctuation can lead to an increase or decrease in the pressure,
which may aect the quality of the sound. If required, open the flaps to release
the air
8
