618072
18
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
cressi.com
GAGE FUNCTION
BACKLIGHT WHILE DIVING
18
LIGHT
INDEX
flash.
GAGE FUNCTION (depth gauge and timer)
The Newton computer is equipped with a third dive computing program GAGE that does not perform any
saturation and desaturation calculation, but it operates as a basic device, indicating dive depth and time, as
well as some accessory data. Under these conditions the dive must be programmed with specific
decompression software and carried out according to proper dive tables. For such ends, Cressi reminds that all
sport dives must be conducted within the no decompression limits and at a maximum depth of 40 m, limit of
sport dives. Exceeding these limits dramatically increases the possibility of decompression sickness!
IMPORTANT: Newton is designed for sport diving only and not for commercial or professional use which
require longer dive times and greater depths, consequently increasing the risk of decompression sickness.
DANGER: Cressi discourages diving with gaseous mixtures other than air without proper training. The
use of technical dives may expose the diver to different risks than those of sport diving, risks that if the
diver does not perfectly know the mixture these risk can include serious physical damages and, in
extreme cases, death.
IMPORTANT: Before diving make sure that the computer is not locked (during a DIVE WITH NITROX check for
the presence of the word "lock" on the upper left part of the screen). In this case, unlock it, placing the SET
LOCK menu in the OFF position. The word "lock" will disappear.
IMPORTANT: Before diving set the computer to PRE-DIVE by pressing the MODE button without releasing
it, or by accessing the ENTR-DIVE menu. In this way, the computer will start processing the dive
parameters within a maximum of 2 seconds after reaching a depth of 1.2 m. In any case, the dive
computer is automatically activated within 20 seconds of reaching a depth of 1.2 m.
With the GAGE function, the following information will be shown on the display off the dive computer:
1) current depth value, in metres (m) or in feet (ft). The depth gauge operative range reaches a depth of 120 m.
2) dive time, shown by the “DIVE-T” icon, given by the timer in minutes and seconds.
3) maximum depth reached during the dive, given in metres (m) or in feet (ft), indicated by the “MAX” icon
4) ascent rate indicator (arrows).
5) GAGE computing program icon.
6) current temperature, expressed in ºC or ºF.
IMPORTANT: The device will not carry out any saturation and desaturation calculation during the remaining 48
hours elapsing from the end of the dive performed with the GAGE function. Therefore, in this period of time, it
will not allow the device to switch to the dive computer mode for the decompression calculation.
DANGER: Should you decide to reset the device, the nitrogen memory will be cancelled. Therefore, the
device will not be able to calculate the following dive. Before using this function, wait for at least 48
hours after the last diving activity.
USE OF THE COMPUTER WITH POOR VISIBILITY
During your diving activity, light condition may not allow easy reading of the display. Therefore, you can switch
on the backlight by pressing the LIGHT key. The displays backlight lasts for a few seconds, and then it
automatically switches off.
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cressi NEWTON bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cressi NEWTON in de taal/talen: Engels als bijlage per email.

De handleiding is 8,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info