Button Function
AV/ Press the “AV/RECEIVER” button (23) to switch bet-
RECEIVER ween AV mode and RECEIVER mode.
AV mode
In AV mode, the images of the connected player are
shown in the monitor display (5).
RECEIVER mode
In RECEIVER mode, the images of the used camera
are shown in the monitor display (5).
11. Replacing the battery
If the range of the provided remote control is reduced, the battery (type: CR2025,
3 V/DC) has to be replaced.
To properly replace the battery, proceed as follows:
• Pull out the battery holder from the remote control as illustrat-
ed to the right.
• Remove the used battery.
• Insert a type CR2025 (3 V/DC) battery into the battery holder.
Observe the polarity (see the illustration on the back of the
remote control).
• Carefully slide the battery holder back into the remote control.
12. Maintenance and cleaning
Regularly check the technical safety of the product, e.g. for damage to the connec-
tions or the sensors.
A clean, dry and soft cloth is sufficient to clean the outside of the camera and the
monitor. For more resistant dirt on the camera, you can moisten the cloth with luke-
warm water.
35
