Button Function
MENU Press the “MENU” button (20) to select the desired
UP/DOWN CHANNEL, BRIGHTNESS, COLOR, CONTRAST,
MIRROR and VOLUME.
Press the “MENU” button (20) repeatedly until the
desired menu is displayed. Then set the desired value
with buttons “+” and “-”.
Making settings using the monitor buttons:
Press the “MENU” button (10) on the monitor to access
the menu for the above settings. Use buttons “UP” (9)
and “DOWN” (11) to set the desired value.
CH1 - CH4 Press buttons “CH1” to “CH4” (17) to select the desired
camera channel directly.
SCAN If you press the “SCAN” button (22), the system swit-
ches through channels CH1 to CH4 at 5-second inter-
vals.
Please note that it is not possible to select the setup
menu during the SCAN process by pressing the
“MENU” button (20) on the remote control or the
“MENU” button (10) on the monitor. You first have to
abort the SCAN process by pressing the “SCAN” button
(22) again.
The SCAN process is active as long as the channel dis-
play flashes (green) in the top right-hand corner of the
screen. The SCAN process is completed as soon as the
channel display stops flashing or is no longer displayed.
