Following this, by pressing, or pressing repeatedly, the large• ........or........
button on the front panel of the device, you can choose further days of the
week and can copy the program of the day selected beforehand (e.g. 2)
by pressing the “COPY” button to these days too.
After you have finished copying the program, press the “• SET” button to
go back to the main screen. (After approximately 10 seconds program
copying that has been finished will be automatically acknowledged and
the device will go back to the main screen).
After going back to the main screen by pressing the “• SET” button, the
program of another day(s) can be freely copied by repeating the above steps.
3.3 Program inspection
Press the “• PROG” button. The serial number indicating the day (days),
the symbol of switch P1 and the time and temperature level set for switch
P1 will appear on the display. (None of the values is flashing). Repeatedly
press the “PROG” button to check the switching values of P2, P3, etc.
The switching values set for various days can be displayed by pressing •
buttons........or........and the “PROG” button.
After checking the program, you can go back to the main screen by •
pressing the “SET” button. (After approximately 10 seconds, the device
will automatically go back to the main screen).
3.4 Program deletion
Press the “RESET” button to delete all programs. Press the “RESET” button
to reset the device to factory default settings.
4. TEMPORARY MODIFICATION OF THE TEMPERATURE
CORRESPONDING TO THE PROGRAM
To simplify manual temperature modifications, with factory
default settings temperatures of 18°C and 22°C are assigned to
the large........button and........button, respectively. When modifying
the temperature manually by pressing the........or........button once,
the temperature will immediately jump to the factory value of the
button. For example, if the current switch P3 ensures a temperature
of 19°C, it can be modified to a standard temperature that ensures
22°C when needed by pressing the + button only once, without
having to press the........button several times in increments of 0.5°C.
Following this, by repeated pressing of button........or........, the temperature
can be further increased or decreased to or from the standard room-
temperature value of 22°C set in the factory in increments of 0.5°C, in
accordance with current requirements.
- 9 -
