MACHINE PREPARATION
WARNING: you are advised to only use airtight batteries in order to avoid
the leakage of acids!
WARNING: you are advised to have the electric connections made by a
qualified, COMAC-trained technician
WARNING: you are advised to always wear protective gloves in order to
avoid the risk of serious injury to your hands
WARNING: You are advised to only lift and move the batteries with lifting
and transportation means suitable for the specific weight and size
7. CONNECTING THE CONNECTOR
1. Connect the battery connector to the machine connector.
2. re-assemble all the elements
WARNING: this process must be carried out by qualified personnel. The
incorrect or imperfect connection of the cables to the connector can seriously
harm people and damage objects.
8. CHARGING THE BATTERY (WITH BUILT-IN BATTERY CHARGER)
Perform a battery charging cycle before using the machine.
When replacing the battery, be sure to use batteries that are suitable for the battery charger installed
(use only 12V AGM or Gel batteries).
In order to recharge the battery:
1. Make sure the recovery tank and the solution tank are empty
2. Move the machine near to the battery charger
3. Remove the battery charger connector socket protection on the back of the machine (1)
4. Plug the battery charger cable (supplied with the machine) into the freed socket
5. Plug the battery charger cable into the mains socket
6. For the correct use of the battery charger, follow the instructions in the enclosed booklet
WARNING: If one of the three LEDs flashes refer to the battery charger
manual supplied with the machine
