319587
37
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
ENGLISH
ENGLISH
ENGLISH
41
D – Preparing for Wet Cleaning with the
Addition of Cleaning Agent
Release the catches to separate the motor housing from the
collection container.
Remove the dust bag and ensure that the container is
empty.
Attach the motor protection fi lter and place the motor
housing back on the collection container.
Remove the inlet hose for the cleaning agent from the tank
(illustration D1).
Remove the cleaning agent tank from the chassis (illustrati-
on D2).
Use the measuring beaker to dose the cleaning agent for
the tank (illustration D3). Please use 3-5 measuring beakers
for 5 litres of water, depending on the level of soiling.
First pour the cleaning agent into the tank (illustration D4).
• Then ll the tank up to the maximum mark with cold water
(illustration D5).
Reattach the tank to the chassis (illustration D6).
Attach the inlet hose for the cleaning agent to the tank and
the motor housing (illustration D7).
Assemble the trigger on the handle (illustration D8, D9).
Use the clamps (4) to attach the inlet hose (8) to the suction
hose (illustration D10).
Connect the inlet hose to the coupling of the motor housing
(illustration D11).
The connection can be removed by pressing the coloured
button on the coupling and then pulling out the connection
(illustration D12).
Attach the suction hose to the motor housing (illustration
D13).
Attach the suction tube (illustration D16).
Attach a washing nozzle to the suction tube (illustration
D14).
In the case of smooth fl oors you can also use the rubber lip
(illustration D15).
Now connect the inlet hose for the cleaning agent to the
quick coupling on the trigger (illustration D17).
Attach the inlet hose for the cleaning agent to the tube with
the clamps.
The small washing nozzle can also be attached directly to
the handle (illustration D18, D19).
Unwind the connection cable completely and insert the plug
into the socket (illustration D20).
E – Wet Cleaning of Textile Coverings,
Carpets and Smooth Floors
CAUTION:
The pump must not run when dry! Do not turn the pump
on if the tank is empty.
Always check the level of the liquid in the tank before use!
CAUTION:
Before you start cleaning!
Always check the effect of the cleaning agent on an
inconspicuous section of the carpet.
Text Coverings with Slight Soiling
Turn on both the “MOTOR” and “PUMP” buttons (illustration
E1, E2).
Press the trigger to distribute the cleaning agent over the
surface (illustration E3).
Release the trigger to interrupt the spraying of the cleaning
agent (illustration E4).
Move the washing nozzle to and fro slowly and evenly sever-
al times over the surface, pressing the trigger repeatedly
(illustration E5).
Then repeat this procedure a few times without pressing the
trigger in order to suck up excess water from the carpet.
Text Coverings with Heavy Soiling
First switch on only the pump (“PUMP” button).
Distribute the cleaning agent over an area of approximately
1m².
Turn the pump off.
Turn the motor on (“MOTOR” button).
Move the washing nozzle to and fro slowly and evenly
several times over the surface until the carpet is as dry as
possible.
Do not walk on the carpet or textile covering while it is still
wet.
Wait until the covering has completely dried.
Wet Cleaning of Smooth Floors
Fit the large washing nozzle to the special smooth fl oor
attachment (illustration E6).
Switch on both the “MOTOR” and “PUMP” buttons (illustrati-
on E1, E2).
Move the washing nozzle to and fro several times slowly and
evenly over the surface (illustration E7), pressing the trigger
repeatedly.
Then suck up the moisture without pressing the trigger.
ޥ NOTE:
The device is fi tted with a temperature safety switch for
the pump.
If the pump is used frequently it switches itself off by
means of the temperature safety switch. After some time
the pump switches on again automatically.
F – After Use
Turn the pump off and press the trigger in order to release
the residual pressure (illustration F1, F2).
Allow the vacuum cleaner to run for a short time without any
load in order to draw the moisture out of the tube and hose.
Turn the vacuum cleaner off with the “MOTOR” button
(illustration F3).
Remove the mains plug from the socket (illustration F4).
Wind the connection lead around the housing (illustration
F5).
Separate the inlet hose and the suction hose from the
vacuum cleaner (illustration F6, F7).
Detach the cleaning agent tank (illustration F8).
Separate the motor housing from the collection container
(illustration F9).
05-BSS 1261 Inhalt 41 13.11.2006, 9:27:09 Uhr
37

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Clatronic bss 1261 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Clatronic bss 1261 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Noors als bijlage per email.

De handleiding is 0,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info