319587
36
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
ENGLISH
ENGLISH
40
Overview of the Components
1 Handle 16 Closure
2 Trigger for cleaning agent 17 Tank for cleaning agent
3 Suction tube, 2-part. 18 Collection vessel
4 Clamp 19 Runner
5 Motor switch (MOTOR) 20 Chassis
6 Pump switch (PUMP) 21 Castors
7 Coupling
8 Inlet hose
Accessories:
9 Suspension device 22 Cleaning agent
10 Large washing nozzle 23 Motor protection fi lter
11 Wet attachment, 24 Measuring beaker
smooth fl oors 25 Crevice nozzle
12 Vacuum hose 26 Permanent fi lter (optional)
13 Carrying handle 27 Dust bag
14 Cover for outlet fi lter 28 Small washing nozzle
15 Inlet hose for cleaning 29 Floor brush
agent 30 Upholstery nozzle
Instructions for Use
Intended Use
The device is intended for use as a wet/dry vacuum cleaner
in accordance with its description and safety instructions.
The device also has an additional connection with cleaning
function.
Any other type of use is considered to be in contradiction of
the intended use and is not permitted.
Nozzle Attachment
Crevice nozzle: For vacuuming in corners and crevices
etc.
Upholstery nozzle:
(only for dry
cleaning)
For vacuuming upholstery, curtains etc.
Floor brush:
(only for dry
cleaning)
To clean carpets or smooth surfaces.
Smooth
oors:
Press the lever down with your foot. The
brush is now visible.
Carpets: Press the lever In the opposite direction.
The brushes are now retracted.
Large washing
nozzle: ( for wet
cleaning)
For larger surfaces, such as carpets or
tiles etc. This brush is also ideally suited
to soaking up water from large surfaces.
Small washing
nozzle: (for wet
cleaning)
Suitable for cleaning smaller surfaces,
such as upholstery.
Releasing the
nozzles:
Pull these off while turning slightly.
A – Assembling the Device
N Take the device and the accessories out of the packaging.
Release the catches in order to separate the motor housing
from the collection container (illustration A1, A2, A3).
The accessories include the rollers, which you should attach
to the chassis (illustration A4, A5).
The motor protection fi lter has to be attached to the bottom
of the motor housing (illustration A6).
If you would like to carry out dry vacuuming, please insert
a dust bag (illustration A7).
Reattach the motor housing to the collection container.
Attach the inlet hose for the cleaning agent (15) to the tank
and then to the connection of the motor housing.
Attach the suction hose to the motor housing (illustration
A10).
The accessories include the suspension device for the
“parking aid”. Attach this suspension device to the suction
tube with the screw (illustration A11).
Attach the required accessory to the suction tube.
The remaining accessories can be stored in the motor
housing (illustration A12).
B – Wet Vacuuming without Cleaning Agent
During wet vacuuming only the motor protection fi lter in the
motor housing (23) is used (illustration B1, B2).
ޥ NOTE:
The paper dust bag is not used during wet vacuuming. It
should be removed from the vacuum cleaner.
The accessories include a rubber lip for the large washing
nozzle. This makes it easier to vacuum up liquids (illustration
B3, B4).
When the liquid has reached the maximum height in the
collection container, a fl oat closes off the fl ow of air to the
motor. The sound of the motor becomes louder and indica-
tes that the container needs emptying.
Turn the vacuum cleaner off and remove the plug from the
socket (illustration B5, B6).
If you would like to stop vacuuming completely, empty the
collection container and wipe it with a cloth (illustration B7,
B8).
Allow the motor protection fi lter to dry.
C – Dry Vacuuming
During dry vacuuming the dry motor protection fi lter and a
paper dust bag are used (illustration C1).
Place a new dust bag on the connection. Check that the bag
is fi rmly in place.
When the dust bag is attached to the connection it should
be pressed down as far as it will go.
Insert the mains plug into the socket and turn the device on
with the “MOTOR” switch (illustration C5, C6).
The dust bag is changed when required.
If the suction power of the device is reduced the bag should
be replaced.
Please use the fl oor nozzle for dry vacuuming (illustration
C3).
05-BSS 1261 Inhalt 40 13.11.2006, 9:27:07 Uhr
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Clatronic bss 1261 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Clatronic bss 1261 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Noors als bijlage per email.

De handleiding is 0,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info