455904
6
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
Features Functions Rear Panel&
18. Main Power Switch
19. AC Connection
20.RCA Master Outputs
21. Channel 3: LINE 3 RCA Input Jacks
22.Channel 3: PHONO 3 Input Jacks
This is the main power ON/OFF button. The READY LED will glow led when power is ON.
Before main power is applied, be sure you have made all connections to the mixer. Also be
sure your amplifier(s) is(are) tuned off. Remember to avoid damaging pops, the mixer should
be powered on first and turned off last.
This connector is used to supply main power to the unit via the included AC adaptor.
The Master Output includes a pair of RCA UNBALANCED JACKS . The RCA jacks send a low
current unbalanced output signal.
These Jacks are used for line level inputs. Connect CD players or Tape Decks to LINE inputs.
Line level musical instruments with stereo outputs such as Rhythm Machines or Samplers
should also be connected to LINE inputs. Turntables should only be connected to “Phono”
inputs. The red colored RCA jack represents the right channel input and the white represents
the left channel input.
20
21 22
23
18
19
24
5
The dual LED’s indicators are used to indicate the master output level.
Selects which source will be active based on what you have connected to the rear panel input
section(Phone/USB/Line).
always set to zero before turning the unit on.
16. LED Monitor Display
17. Input toggle switch
Connect turntables equipped with MM pickup cartridge to PHONO inputs (All DJ turntable use
MM pick-up cartridges).
23 GND (GROUND TERMINAL)
24.USB Terminal
.
Connect each of your turntables ground leads to either of the three ground terminal. This will
reduce the humming and popping noises associated with magnetic phono cartridges.
After hooking up your computer with the USB connections, your computer will detect them
respectively as an external sound card (USB Code). You may either play music on your
computer or send it via the USB connections as a signal source to the unit; alternatively ,you
may record the master output signal on your computer using the USB connections.
headphones on. Be sure the CUE MIXINGKNOB (13) is turned to the “CUE” position to hear
the selected channel source.
This rotary knob is used to control the master output level (volume). To avoid distorted output
try to maintain an average output signal level below “OVER”. Be sure this volume control is
15. Master Volume Control
After
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Citronic PRO-3 USB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Citronic PRO-3 USB in de taal/talen: Engels als bijlage per email.

De handleiding is 0,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info