455904
5
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
When engaged this function will decrease all signal levels, except the microphone level, by
14dB.
These switches are used to select the input source assigned to each channel. Each channel
may only be assigned one input source at a time.
This adjustment is used to adjust an audio source signal input gain for a channel. Never use
the gain control to adjust output volume. Setting the gain level properly will ensure a clean
output signal. To properly set the gain level controls:
1. Be sure the MASTER VOLUME CONTROL (15) is set to minimum (zero output).
2. Set the CHANNEL FADER (10) to level 7.
3. Begin play on an audio source connected to the channel you are adjusting.
4. Turn the PFL (14) function on, for the channel you are adjusting.
5. Use the GAIN CONTROL (6) to achieve an average output level of no distortion.
4. Talkover Switch
5. Channel Input Switch
6. Channel Gain Control
7~9.CHANNEL EQUALIZER ( BASS/MID/TREBLE CONTROL)
CHANNEL TREBLE CONTROL
CHANNEL MIDRANGE CONTROL
CHANNEL BASS CONTROL
10.Channel Fader
11. Crossfader
12.Headphone Level Control
13.Headphone Mix (Pan) Control
All of the channels include a three-band signal EQ. These controls are used to increase or
decrease the LOW’s, MID’s, and HI’s of the output signal.
This knob is used to adjust the treble levels of a channel allowing for a maximum treble gain
of 9dB or maximum decrease of -15dB. Turning the knob in a counter-clockwise direction
will decrease the amount of treble applied to a channel signal, turning the knob in a clockwise
direction will increase the amount of treble applied to a channel signal.
This knob is used to adjust the midrange levels of a channel allowing for a maximum midrange
gain of 9dB or maximum decrease of -24dB. Turning the knob in a counter-clockwise direction
will decrease the amount of midrange applied to a channel signal, turning the knob in a
clockwise direction will increase the amount of midrange applied to a channel signal.
This knob is used to adjust the low frequency levels of a channel allowing for a maximum bass
gain of 9dB or maximum signal decrease of -25dB. Turning the knob in a counter-clockwise
direction will decrease the amount of bass applied to a channel signal, turning the knob in a
clockwise direction will increase the amount of bass applied to a channel signal.
These faders are used to control the output signalofany source assigned to its particular
channel.
This fader is used to blend the output signals of channels one and three together. When the
fader is in the full left position (channel 1), the output signal of channel on will be controlled
by the master volume level. The same fundamentals will apply for channel three. Sliding the
fader from one position to another will vary the output signals of channels one and three
respectively. When the crossfader is set in the center position, the output signals of both the
channels one and channels three will be even.
Sets the desired music level to the headphones. The headphone program depends on the
position of the monitor pan control(13).
4
Varies the mix between the cued input and master output, ideal for accurate beat mixing. Full
left will give cued input, full right will give master output program.
14.PFL BUTTONS
These buttons are used to activate a channels “CUE” mode. A red LED next to the PFL
button will glow when a channels cue mode is activated. Cue mode will send a channels
incoming signal to the headphones. The cue level is adjusted by the CUE LEVEL ADJUS
-TMENT KNOB (12). Be sure the cue level is set to minimum before putting a pair of
Microphone Bass Control
This knob is used to adjust the bass levels of the Microphone with a maximum signal gain of
10dB or maximum signal decrease of -10dB. Turning the knob in a counter-clockwise direct
-ion will decrease the amount of bass applied to the microphone signal, turning the knob in
a clockwise direction will increase the amount of bass applied to microphone signal.
After
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Citronic PRO-3 USB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Citronic PRO-3 USB in de taal/talen: Engels als bijlage per email.

De handleiding is 0,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info