34 35
[Setting the Alarm Time]
1. Turn the crown to set the mode hand to the Alarm 1 [AL-1] or Alarm 2 [AL-2]
mode.
• Second hand: Moves rapidly to the ON position (42 seconds) or OFF position
(38 seconds).
• 24 hour hand, hour hand, minute hand: Move to the previously set alarm time.
• Function hand: Stops at the 0-position.
2. Pull the crown out to Position 2 (alarm setting position).
• The alarm setting is turned ON automatically.
3. Turn the crown to set the alarm time.
(1) Turning the crown by one revolution to the right causes the 24 hour hand,
hour hand and minute hand to move forward (clockwise).
(2) Turning the crown by one revolution to the left causes the 24 hour hand,
hour hand and minute hand to move backward (counter-clockwise).
• Turning the crown continuously by two or more revolutions causes each
hand to advance continuously. When stopping the hands while they are
advancing continuously, turn the crown by one revolution to the right or
left. When the continuous advance of the hands is not stopped manually,
they stop automatically after advancing by 12 hours.
• Set the alarm while making sure not to mistake AM and PM by referring to
the 24 hour hand.
4. Return the crown to the normal position after setting the alarm time.
[Switching Alarm ON and OFF]
The alarm is switched ON and OFF each time button (A) is pressed when the
crown is pulled out to Position 1 or Position 2 in the alarm mode.
[Alarm Tone Monitor]
When button (A) is pressed with the crown in the normal position in the alarm
mode, the alarm tone sounds for as long as button (A) is pressed.
[Stopping the Alarm Tone]
Press either button (A) or (B) to stop the alarm tone while it is sounding.
