517218
20
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
20
Step 7:
Installation of the right (34) and left (28) footrest on the pedal tubes
(21+24).
1. Push the footrest (34) onto the pedal tube (24) so that the bores in
(34) are aligned with one of the possible installation positions in (24).
(Note. The high lip on the long side of the footrest must point inwards
(towards the main frame (1).)
2. Put one washer (29) on each carriage bolt (30) and push through the
bores from the top and fasten from the bottom with the washers
(31), the spring washers (32) and the knob down (33).
(Note. The position adjusted in this way should always be equal at
both sides. The positions can be changed as desired at all times by
removing the carriage bolts (30) and sliding the footrests on the
footrest brackets.)
3. Install the left footrest (28) with all additionally required parts on
the left hand side of the machine as described in 1. + 2.
Step 8:
Installation of the computer (48) and handle bar cover (50+51) on
the handlebar post (15).
1. Put the ends of the computer cable (14) and pulse cable (40) into the
socket at the backside of the computer (48).
2. Push the computer (48) onto the plate at the upper end of the
handlebar post (15).
(Note: When pushing on the computer, thread the cables in the
bores of the handlebar post (15) so that the cables cannot be
trapped.
3. Put the front and back handlebar cover (50+51) onto the upper end
of handlebar post (15) together and fix them with screws (37+38).
Step 9:
Attach the power
1. Please insert the plug of adaptor (52) to the jack of chain guard.
2. Please insert the adaptor (52) to the jack of wall power.
Step 10:
Checks
1. Check the orderly installation and function of all bolted and plug
connections. Installation is then complete.
2. When everything is in order, familiarise yourself with the machine at
a light resistance setting and make the individual adjustments of the
footrests (28) and (34).
Note: Please keep the tool set, the puller and the instructions carefully
because these may be required later for repairs or spare parts orders.
If you ever remove the covers (10) and (11), observe that these are
attached not only outwardly with the screws (64+65), but also inwardly
at the rear end of the cover with the screws (65).
20

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Christopeit-EL-8---9824

Zoeken resetten

  • Na jarenlang sportplezier weigert mijn crosstrainer. Bij het aansluiten van de adopter op de crosstrainer begint deze meteen te piepen. Als ik de testknop indruk gebeurt er helemaal niets meer. Weet iemand een oplossing voor dit probleem?> Gesteld op 14-5-2020 om 21:46

    Reageer op deze vraag Misbruik melden
  • Heeft u misschien een handleiding voor mij van een crosstrainer el 8 .
    Bij voorbaat hartelijk dank.
    Ron Gesteld op 8-8-2014 om 12:28

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Christopeit EL 8 - 9824 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Christopeit EL 8 - 9824 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info