517196
18
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
18
Step 9:
Installing the latissmus column (24), the weight slide (14), the stop slide
(58), the plastic inserts (12), the latissmus bar (16), the handle wrappings
(29), the cable (17) and the cable drum (18) with the screws (39), the
plastic spacers (56), the washers (52) and the self-locking nuts (49).
1. Place all parts named above accessibly in a free space.
2. Push the plastic inserts (12) onto the weight slide (14) and the stop slide
(58) at the top and bottom and push the two slides (14 + 58) from the
bottom onto the latissmus column (24), observing the direction of the
weight disc holder and the stop points.
3. Push the latissmus rest (66) in the opposite direction of the weight disc
holder on the latissmus column (24) and fasten fi rmly with the screw
(38), the washer (52) and the nut (49).
4. Push a washer (52) and a plastic spacer (56) onto the screw (39), insert the
cable drum (18) in the latissmus column (24) with the holes corresponding
and fi x in place by pushing in the screw (39). Push the second plastic
spacer (56) and a washer (52) onto the screw end and fasten fi rmly with
the nut (49), ensuring that the plastic spacers (56) are not bent.
5. Push the cable (17) with an eye over the installed cable drum (18) through
the latissmus column (24) and joun the cable end to the weight slide (14)
with a carbine hook (45). Then join the other cable end with the second
carbine hook (45) to the latissmus bar (16).
6. Finally, push the spring circlip (27) on the bar bell weight holders of the
weight slide (14).
7. The latissmus column can be pushed into the foot (8) in the same way as
the curler console holder and fastened with the handgrip screw (31).
Step 8:
Installation of the curl trestle on the curler trestle holder with the screws
M8x15mm (41) and the washers 8//16mm (53).
1. Place the curl trestle (21) with the back upwards.
2. Put one spring washer (55) and one washer (53) on each screw (41).
3. Place the plate at the end of the curl trestle holder (9) so that the holes
in the plate and in the curl trestle (21) are aligned.
4. Push the screws (41) through the holes in the plate holder and screw
into the threaded holes in the curl trestle support and tighten fi rmly.
5. Push the curl trestle holder into the foot (8) and secure in the desired
position by pushing in and tightening the handgrip screw (31).
(Note: The adjusted position can be changed as desired later and the
curl trestle unit can be installed or detached depending on the desired
exercise.
The leg curler (10) can also be secured and released according to the
desired exercise by pushing in or pulling out the securing clip (13)
beneath the handgrip screw (31) in the foot (8).)
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Christopeit Basic-Concept 9881 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Christopeit Basic-Concept 9881 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info