517196
15
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
15
Assembly Instructions
Before beginning assembly, be sure to observe our recommendations
and safety instructions.
Several items are pre-assembled.
Step 1:
Connecting the rear feet (1) to the crossframe (2) with the reinforcing
plates (59), the hexagonal bolts M10x70mm (38), the washers (52) and
the self-locking nuts M10 (49).
1. Place the rear feet (1), the crossframe (2), the screws (38), the washers
(52) and the nuts (49) accessibly.
2. Push one washer (52) onto each of the screws (38) and push from the
outside through the reinforcing plates (59) through the two rear feet
(1).
3. Join the crossframe (2) with the holes over the inserted screws so that
the longitudinal frame holder faces forwards and connect the whole
assembly by pushing on the washers (52) and lightly screwing on the
nuts (49).
4. Then tighten the previously made bolted connection fi rmly and mount
the securing clips left (60) and right (61) with the washers (54) and the
self-locking nuts (62) on the rear feet (1).
5. Slide the adjusting bar (4) into one of three different positions at rear
foot (1)
Step 2:
Connecting the front foot (8) and the crossframe (2) to the longitudinal
frame (3) with hexagonal screws (39) + (40), washers (52) and the self-
locking nuts (49).
1. Place the front foot (8), the longitudinal frame (3), the screws (40), the
washers (52) and the nuts (49) accessibly.
2. Push a washer (52) onto each screw M10x25 (40) and push these from
the front through the front foot (8).
3. Join the longitudinal frame (3) with the holes over the inserted screws
and connect by pushing on the washers (52) and loosely screwing on
the nuts (49). Then tighten the bolted connection.
4. Insert the longitudinal frame (3) in the crossframe (2) so that the last
hole but one in the longitudinal frame (3) corresponds with the last
hole in the crossframe (2). Push a washer (52) onto the screw M10x60
(39) and push through the overlapping holes. Push a washer (52) onto
the end of the screw ant screw on the nut (49) until the self-locking
part of the nut engages on the thread of the screw (39) and the folding
mechanism is not blocked.
English
Step 3:
Installation of the crossbar (11) with the front foot (8) and the longitudinal
frame (3) with the hexagonal screws (46) + (48), washers (53) and nuts
(50).
1. Place the crossbar (11) with the screws (46) + (48), the washers (53)
and the nuts (50) accessibly.
2. Place a washer (53) on each of the screws (46) + (48). Hold the crossbar
with the hole over the fastening point on the front foot (8) and screw
on loosely with the screw (46).
3. Align the crossbar (11) with the second hole over the fastening point
on the longitudinal frame (3) and fasten loosely with the screw (48), the
washers (53) and the nut (50).
4. Then tighten the loosely made bolted connection.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Christopeit Basic-Concept 9881 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Christopeit Basic-Concept 9881 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info