471845
34
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
ENG
FR
34
Si un défaut de fonctionnement se produit, examinez les éléments suivants avant
de contacter CatEye ou votre détaillant pour assurer la réparation ou service.
Probléme/Éléments de vérification/Solution
L'affichage du mouvement devient plus lent.
La température environnante est-elle basse (au-dessous de zéro centigrade) ?
Peut être utilisé au-dessous de 0
°
avec un affichage d'écran plus lent.
Tous les caractères numériques affichés sur deux lignes dans l'écran-3 clignotent.
La batterie de lappareil principal est presque épuisée.
Remplacez-la immédiatement par une nouvelle batterie (CR2032). Après rempla-
cement, soyez sûr de répéter l'opération (page 10).
L'affichage n'apparaît pas.
La batterie de l'appareil est-elle épuisée ?
Remplacez-la avec une nouvelle batterie (CR2032). Après remplacement, soyez
sûr de repeter l'opération (page 10).
L'affichage apparaît sans aucune signification.
Répétez l'opération (page 10).
Des valeurs anormales apparaissent.
Y a t-il des objets émettant les ondes électromagnétiques (des pistes ferroviaires,
stations de transmission pour la télévision, etc...) tout près ?
Eloignez l'appareil de n'importe quel objet qui peut causer des interférences, et
réinitialisez les informations.
Appuyer sur le bouton START/ENTER n'allume pas ou n'arrête pas la mesure.
Vérifiez si le mode automatique est active (à l'aide de l'élément
s'illuminant).
Quand l'élément
s'illumine, le mode automatique est active; vous ne pouvez
pas commencer ou arrêter la mesure avec la touche. Arrêtez le mode automatique.
(Voir le mode automatique à la page 28.)
Les données concernant la vitesse ne sont pas affichées.
La distance entre le capteur de vitesse et laimant est-elle trop large?
La ligne indicatrice du capteur de vitesse s’éloigne-t-elle du centre de laimant?
Ajustez correctement la position du capteur de vitesse et de laimant. (Voir Instal-
lation de lunité sur votre bicyclette en page 8).
Le mot SLEEP est-il affiché sur l’écran?
Appuyez sur un bouton pour annuler le mode veille et réveiller le système.
La batterie du capteur de vitesse est-elle épuisée?
Remplacez-la par une nouvelle batterie (de type CR2032)
La batterie de lunité principale est-elle épuisée?
Après le remplacement, assurez-vous de faire redémarrer le système (page 10).
Dépannage
If a malfunction occurs, check the following before contacting Cat Eye or your
retailer for repair or service.
Trouble / Check Items / Remedy
Display motion becomes slower.
Is the surrounding temperature low (below zero centigrade/32 farenheit)?
Can be used below 0° with slower screen response.
All numeric characters displayed in two lines on Display-3 flash.
The remaining battery capacity for the main unit has become low.
Replace it with a new battery (CR2032) in good time. After replacement, be sure to
perform the restarting operation (page 10).
No displays appear.
Is the battery for the main unit used up?
Replace it with a new battery (CR2032). After replacement, be sure to perform the
restarting operation (page 10).
Meaningless display appears
Perform the restarting operation (page 10).
Abnormal values appear.
Are there any objects emitting electromagnetic waves (railway tracks, transmitting
stations for television, etc.) nearby?
Keep the unit away from any object that may be causing interference, and reset the
data.
Pressing the START/ENTER button does not start or stop measurement.
Check whether the auto-mode is turned on (with the
icon illuminating).
When the
icon illuminates, the auto-mode is on; you cannot start or stop measure-
ment by pressing the button. Turn off the auto-mode. (See Auto-mode on page 28.)
Cannot measure the trip speed (The speed signal is not received.)
Check whether the distance between the speed sensor and the magnet is too large.
Is the indication line of the speed sensor off the center of the magnet?
Adjust the position of the speed sensor and that of the magnet correctly. (See In-
stalling the unit on your bicycle on page 8.)
Is SLEEP indicated on the screen?
Cancel the sleep mode by pressing a button.
Is the battery for the speed sensor depleted?
Replace it with a new battery (CR2032).
Is the battery for the main unit depleted?
After replacement, be sure to perform the restarting operation (page 10).
Trouble shooting
34

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cateye CC-HR200DW bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cateye CC-HR200DW in de taal/talen: Engels, Frans als bijlage per email.

De handleiding is 1,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cateye CC-HR200DW

Cateye CC-HR200DW Gebruiksaanwijzing - Nederlands - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info