Handleiding Casio KL8200 (pagina 28 van 36) (Engels)

506039

Verklein

Vergroot

Pagina terug

1/36

Pagina verder

E-27

• The optional FA-900 makes it possible for you to use the

label printer to print data created on your personal com-

puter.

Importing Data from an SF Unit

Use the following procedure to send data to the label printer

from a SF Unit.

To connect the SF Unit to the label printer

1. Turn off the power of the label printer and the SF Unit.

2. Use the optionally available SB-62 Connecting Cable to

connect the SF Unit to the label printer.

3. Turn on the power of the label printer and the SF Unit.

To send data from the SF Unit to the label

printer

1. On the SF Unit, use its pen printer function to recall the

data you want to send.

• See the Owner’s Manual that comes with the SF Unit for

details on how to recall data.

2. On the label printer, press FUNC and then DEL (COMM).

This causes the message “RECEIVE? SET/ESC” to ap-

pear on the label printer screen.

3. Press SET, and the message changes to “RECEIVE OK!”

4. On the SF Unit, press SET to start sending data to the

label printer.

• A communication error occurs on the label printer if it does

not start to receive data within about 20 seconds after the

“RECEIVE OK!” message appears on its screen.

• “NOW SENDING” is on the screen of the SF Unit and

“NOW SENDING” is on the screen of the label printer while

data is being transferred.

• If a communication error occurs on the label printer, press

any key besides OFF, FUNC, SHIFT, CODE or ON to clear

the error, and then try again.

• The label printer screen shown appear as shown below

after data communication is complete.

• The received data is indicated on the display as “DATA 1”,

“DATA 2”, and so on. Up to 16 data items can be received,

as long as the total length of the tape to print the data

items does not exceed 250mm.

1ATAD

c8.11×1

5. On the label printer, press CAPS to specify the receive

mode of additional data items.

Each press of CAPS toggles label printer between the

following two modes.

• COMM

Received data is appended to the end of previously

received data.

• COMM

Received data replaces previously received data.

• If you do not want to receive and append any more data

items, skip steps 5 and 6.

6. Press SET and repeat steps 3 and 4 to receive more

data.

• The “!” indicator means that data items will be printed

one at a time. If you want to print all of the received data

items at once, press B to change “!” to “A”. Press B

again to change back to “!”.

7. Press PRINT to print the data.

• If “!” is on the display, pressing PRINT prints the single

data item where the cursor is currently located. Use u

and i to move the cursor to the data item you want to

print.

• If “A” is on the display, pressing PRINT prints all of the

received data items.

• Use a tape that is at least 9mm wide when printing re-

ceived data items.

• You can enlarge received data item character size verti-

cally by a factor of two and horizontally up to a factor of 4.

• Use a tape width of at least 18mm when received data

item character size is increased vertically by a factor of two.

• None of the following functions can be used with received

data: frames, preset formats, auto sizing, preset layouts,

block operations, proportional character spacing, smooth-

ing, character input settings, character deletion, text stor-

age into memory, text recall from memory.

• The printer returns to the screen in step 4 (the one that

appears after data communication is complete) after print-

ing is complete.

8. Press ESC SET to quit data communications.

• All received data is cleared from label printer memory when

you quit data communications.

9. Turn the label printer and SF Unit off and disconnect the

cable.

Importing Data from a Copy Pen

Use the following procedure to send data to the label printer

from a Copy Pen.

To connect the Copy Pen to the label printer

1. Turn off the power of the label printer and the Copy Pen.

2. Use the optionally available SB-62 Connecting Cable to

connect the Copy Pen to the label printer.

3. Turn on the power of the label printer and the Copy Pen.

To send data from the Copy Pen to the label

printer

1. On the Copy Pen, press READ and read the data you

want to send.

• If you are using the Copy Pen’s pause feature, note that

you will be able to send up to 15 data items (reads), as

long as the total length of the tape to print the data does

not exceed 250mm.

• See the Owner’s Manual that comes with the Copy Pen

for details on how to read data.

2. On the label printer, press FUNC and then DEL (COMM).

This causes the message “RECEIVE? SET/ESC” to ap-

pear on the label printer screen.

3. Press SET to receive the data.

1ATAD

c8.11×1

• The label printer screen shown appear as shown above

after data communication is complete.

• The received data is indicated on the display as “DATA 1”,

“DATA 2”, and so on. Up to 15 data items can be received,

as long as the total length of the tape to print the data

items does not exceed 250mm.

• If a communication error occurs on the label printer, press

ESC to clear the error, and then try again.

4. On the label printer, press CAPS to specify the receive

mode of additional data items.

Each press of CAPS toggles label printer between the

following two modes.

• COMM

Received data is appended to the end of previously

received data.

• COMM

Received data replaces previously received data.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Casio KL8200 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Casio KL8200

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info