611481
5
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
Operation Guide 5117
5
Recovery Times
The table below shows the amount exposure that is required to take the battery from
one level to the next.
Approximate Exposure Time
Level 5 Level 4 Level 3 Level 2 Level 1
2 hours 22 hours 6 hours
7 hours 82 hours 22 hours
10 hours 133 hours 36 hours
113 hours - - - - - - - - - - - - - - - -
Exposure Level
(Brightness)
Outdoor Sunlight
(50,000 lux)
Sunlight Through a
Window (10,000 lux)
Daylight Through a
Window on a Cloudy
Day (5,000 lux)
Indoor Fluorescent
Lighting (500 lux)
The above exposure time values are all for reference only. Actual required exposure
times depend on lighting conditions.
Timekeeping
You can adjust the Home City time and date in the Timekeeping Mode manually. You
also can simultaneously display the current time in one other time zone, by specifying
a Dual Time City.
For information about selecting a Dual Time City, see “To specify the Dual Time City”.
Pressing D in the Timekeeping Mode will cycle the lower display between the
screens shown below.
D
D
Home City date Home City time Dual Time
D
Read This Before You Set the Time and Date!
This watch is preset with a number of city codes, each of which represents the time
zone where that city is located. When setting the time, it is important that you first
select the correct city code for your Home City (the city where you normally use the
watch). If your location is not included in the preset city codes, select the preset city
code that is in the same time zone as your location.
Note that all of the times for the World Time city codes and Dual Time City are
displayed in accordance with the time and date settings you configure for the
Timekeeping Mode.
To set the time and date manually
1. In the Timekeeping Mode, hold down A for about five
seconds until the left dial hand points to T1 and the city
code flashes on the upper display. This is the setting
screen.
2. Use D and B to select the city code you want.
Make sure you select your Home City code before
changing any other setting.
For full information on city codes, see the “City Code
Table”.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
3. Press C to move the flashing in the sequence shown below to select the other
settings.
Seconds
12/24-Hour
Format
Hour
Minutes
DST
Month
Year
City Code
DayPower Saving
4. When the timekeeping setting you want to change is flashing, use D or B to
change it as described below.
Change the city code
Cycle between Auto DST ( ),
Daylight Saving Time (
) and
Standard Time (
).
Use D (east) and B
(west).
Press D.
To do this: Do this:Screen:
5. Press A twice to exit the setting screen.
For details about the Daylight Saving Time setting, see “To change the Daylight
Saving Time (summer time) setting”. For information about Power Saving, see “To
turn Power Saving on and off”.
Toggle between 12-hour ( ) and
24-hour ( ) timekeeping
Reset the seconds to
Change the hour and minutes
Change the year, month, or day
Toggle between Power Saving on
(
) and off ( )
Press D.
Press D.
Use D (+) and B (–).
Press D.
Auto DST (AvtA) can be selected only while
LIS
,
LON
,
MAD
,
PAR
,
ROM
,
BER
,
STO
,
ATH
,
MOW
,
TPE
,
SEL
,
TYO
,
HNL
,
ANC
,
YVR
,
LAX
,
YEA
,
DEN
,
MEX
,
CHI
,
MIA
,
YTO
,
NYC
,
YHZ
,
or
YYT
is selected as the Home City code. For more
information, see “Daylight Saving Time (DST)” below.
The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
The time calibration signals transmitted from Mainflingen (Germany), Anthorn
(England), or Fort Collins (the United States) include both Standard Time and DST
data. When the Auto DST setting is turned on, the watch switches between Standard
Time and DST (summer time) automatically in accordance with the signals.
Though the time calibration signals transmitted by the Fukushima and Fukuoka/
Saga, Japan transmitters include summer time data, summer time currently is not
implemented in Japan (as of 2009).
The default DST setting is Auto DST (
) whenever you select
LIS
,
LON
,
MAD
,
PAR
,
ROM
,
BER
,
STO
,
ATH
,
MOW
,
TYO
,
ANC
,
YVR
,
LAX
,
YEA
,
DEN
,
MEX
,
CHI
,
MIA
,
YTO
,
NYC
,
YHZ
,
or
YYT
as your Home City code.
If you experience problems receiving the time calibration signal in your area, it
probably is best to switch between Standard Time and Daylight Saving Time
(summer time) manually.
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down A for about five
seconds until the left dial hand points to T1 and the city
code flashes on the upper display. This is the setting
screen.
2. Press C and the DST setting screen appears.
3. Use D to cycle through the DST settings in the
sequence shown below.
Auto DST ( ) DST off ( ) DST on ( )
4. When the setting you want is selected, press A twice to exit the setting screen.
The DST indicator appears to indicate that Daylight Saving Time is turned on.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
DST indicator
Dual Time
Dual Time lets you display the current time in another time zone called your “Dual
Time City”, in addition your Home City’s current time. This feature is very handy for
business professionals and others who need to keep track of the current time in two
different time zones.
For information about how to display the current time in the Dual Time City in the
lower display, see “Timekeeping”.
To specify the Dual Time City
1. In the Timekeeping Mode, hold down A for about five
seconds until the left dial hand points to T1 and the city
code flashes on the upper display.
2. Press A again. The left dial hand will move to T2 and
the current Dual Time City code will start to flash on the
upper display. This is the Dual Time City selection
screen.
3. Use D (eastward) and B (westward) to scroll through
the available city codes.
See the “City Code Table” for information about city
codes.
4. Press A to exit the setting screen.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Left dial hand
Hand Home Position Correction
The hour and minute hands of the watch can be thrown off by exposure to strong
magnetism or impact.
You can perform correction of the hour and minute hand home positions manually.
To adjust the home positions manually
1. In the Timekeeping Mode, hold down D for about three
seconds, until H-SET appears on the upper display.
The dial hands are in their correct home positions
when the left dial hand moves to C (CHG) and the
stopwatch hand moves to 60. If they don’t, use B to
adjust the left dial hand position and D to adjust the
stopwatch hand position.
2. After confirming that both dial hands are in their correct
home positions, press C.
This will change to hour hand and minute hand home
position manual correction.
Correct dial hand
positions
l
l
l
l
l
l
l
l
l
l
l
l
l
l
The hour and minute hands are in their correct home
positions if they are pointing to 12 o’clock. If they are
not, use D (+) and B (–) to adjust their positions as
required.
Pressing C here will return to the setting at the
beginning of step 2.
3. After everything is the way you want, press A to return
to the Timekeeping Mode.
After you complete the home position adjustment
procedure, place the watch in a location that allows
good time calibration signal reception, and then a
manual receive operation. See “To perform manual
receive” for more information.
Correct hour and
minute hand
positions
l
l
l
l
l
l
l
l
l
l
l
l
l
l
12-hour and 24-hour timekeeping
With the 12-hour format, the PM indicator appears to the left of the hour digits for
times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
hour digits for times in the range of midnight to 11:59 a.m.
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio 5117 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio 5117 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Casio 5117

Casio 5117 Gebruiksaanwijzing - Nederlands - 6 pagina's

Casio 5117 Gebruiksaanwijzing - Deutsch - 7 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info