466630
6
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
Operation Guide 2894
6
Historical Record
The historical record shows data for all save sessions performed since the
last time the historical record was cleared.
To view periodic records and current session record contents
1. Enter the Data Recall Mode.
2. Use the C and A to scroll through the data and display the one you
want.
Data Type
High Altitude
Low Altitude
Total Ascent
Total Descent
Description
Highest altitude reached during all
sessions.
Lowest altitude reached during all
sessions.
Total cumulative ascent during all sessions.
Total cumulative descent during all
sessions.
Screen Name
MAX
MIN
ASC
DSC
REC
(
40
)
REC
(
2
)
REC
(
1
)
MAX
MIN
ASC
DSC
REL
To view the current session record contents, use C to scroll forward past
the last periodic record (which will display the current session record
MAX
screen), or A to scroll back past the first periodic record (to the REL
screen).
3. After you are finished viewing data, press D to exit the Data Recall Mode.
Dashes (
x
xxxx) will be displayed if data has been deleted or if there is no
corresponding data due to error, etc. In such cases, total ascent and total
descent values will show zero.
Periodic
records
C
A
Current session
record
MAX
MIN
ASC
DSC
Historical record data items
C
A
To view historical record contents
1. Enter the Data Recall Mode.
2. Press B to display the historical record high altitude screen (
MAX
).
3. Use the C and A to scroll through the historical record screens as shown
below.
4. To return to the periodic record and current session screens, press B
again.
5. After you are finished viewing data, press D to exit the Data Recall Mode.
Clearing the Historical Record
Use the following procedure when you want to clear the contents of the
historical record and restart all values from zero.
To clear the historical record
1. In the Data Recall Mode, press B to display
the high altitude data (
MAX
) of the historical
record.
2. Hold down E.
CLR will appear in the upper part of the
display.
3. Keep E held down for an additional two
seconds until
CLR starts flashing.
The historical record high altitude screen will
reappear when data deletion is complete.
If you release the E button part way through
the above procedure, the watch will return to
the historical record high altitude screen
without deleting the data.
World Time
World Time digitally displays the current time in
30 cities (29 time zones) around the world.
For full information on city codes, see the City
Code Table.
All of the operations in this section are
performed in the World Time Mode, which you
enter by pressing D.
Timekeeping Mode time
Current time in the zone
of the selected city code
To view the time in another city
In the World Time Mode, use C (east) and A (west) to scroll through city
codes (time zones).
When the currently selected time zone is one that includes mostly ocean, a
value indicating the zones Greenwich Mean Time differential appears in
place of a city code.
If the current time shown for a city is wrong, check your Home City time
settings and make the necessary changes.
To toggle a city code time between Standard Time and Daylight
Saving Time
1. In the World Time Mode, Use C (east) and
A (west) to display the city code (time zone)
whose Standard Time/Daylight Saving Time
setting you want to change.
2. Hold down E to toggle between Daylight
Saving Time (DST indicator displayed) and
Standard Time (DST indicator not displayed).
The DST indicator appears on the display
whenever you display a city code for which
Daylight Saving Time is turned on.
You cannot toggle between Daylight Saving Time and Standard Time if the
displayed city code is
GMT
.
Note that the DST/Standard Time setting affects only the currently
displayed city code. Other city codes are not affected.
Stopwatch
The stopwatch lets you measure elapsed time,
split times, and two finishes.
The display range of the stopwatch is 9 hours,
59 minutes, 59.99 seconds.
The stopwatch continues to run, restarting from
zero after it reaches its limit, until you stop it.
The stopwatch measurement operation
continues even if you exit the Stopwatch Mode.
Exiting the Stopwatch Mode while a split time is
frozen on the display clears the split time and
returns to elapsed time measurement.
All of the operations in this section are
performed in the Stopwatch Mode, which you
enter by pressing D.
Minutes
Seconds
1/100
second
Timekeeping
Mode time
Hours
First runner
finishes.
Display time
of first runner.
Display time of
second runner.
Second runner
finishes.
Elapsed Time
CC C C A
Start Stop Re-start Stop Clear
Split Time
CA A C A
Start Split Split release Stop Clear
(
sp displayed)
Two Finishes
CA C A A
Start Split Stop Split release Clear
To measure times with the stopwatch
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio 2894 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio 2894 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Casio 2894

Casio 2894 Gebruiksaanwijzing - Nederlands - 13 pagina's

Casio 2894 Gebruiksaanwijzing - Deutsch - 13 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info