Horizontal sweep
8 L4
1
Press button to start the continuous left and right horizontal
swing .
2
Press button to stop the horizontal swing. The vertical flap will
stop at the current position.
Note
Horizontal sweep can be combined with air flow direction [7].
Personalisation (myComfort)
6 2 3 4 5 7 13 N
Memorise the desired operating parameters of the unit, with the
possibility to recall them any time.
The unit can be either off or in operation.
After 10 seconds without pressing any button, the procedure will stop
and the remote control disply resume its original state.
Air flow direction
7 L1 L2 L3
The air flow direction can be adjusted to optimize air distribution in the
room.
1
Press button [7] repeatedly to choose one of the following
louvre positions.
1a
Automatic [L1 flashing] - Air direction will be set automatically.
Louvre will be set to the preset position according to the
operation mode.
1b
Fixed [L2 fixed]- 6 positions can be chosen.
The louvre can be set to one of 6 different air flow directions.
1c
Continuous [L3 swinging] - Will continuously swing up and
down.
“Swing” always assures optimal even air distribution in the
room.
Fan speed selection
5 M1 M2 M3 M4
The air flow intensity can be adjusted to optimize air distribution in the
room.
1a
[M1] Low speed (for night operation)
1b
[M2] Medium speed
1c
[M3] High speed (at start-up, to reach temperature)
1d
[M4] Automatic (fan speed will automatically switch to the
value required for optimum comfort)