816472
16
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
16
The electromotor starts up, but the diamond cutting
blade doesn’t turn:
1. Check if the bolt is tightened sufficiently on the flange
set.
2. Check if the gear wheel transmission functions well.
Turn around the driven sha and attentively listen
if the armature revolves simultaneously. If not, please
contact a specialist to check the machine.
The diamond cutting blade is running but swings:
1. Check if the flanges and the centre of the diamond
cutting blade are clean. Remove visible dirt.
2. Check the straightness of the diamond cutting blade.
In case of doubt contact your supplier.
3. In case of oscillation by clearance on the bearing
or a crooked sha, contact the supplier. Working with
a swinging blade can lead to dangerous situations.
The diamond cutting blade cuts too slowly.
1. Check the saw depth. Cutting in concrete or stone has
to be done in steps of 2,5 to 5 cm. Depending of the
hardness of the stone (medium hard, abrasive stone
material) a 5 until 8 cm saw depth is possible.
2. The diamond cutting blade is blunt. The diamond
grains are worn out and not sticking out of the metal
bonding. Check this by scratching your nail at the
edge of the diamond cutting blade. In case of a blunt
blade you feel a polished surface. You can easily
solve this problem by making some cuts into an
abrasive stone material. A special grindstone is
available.
The diamond cutting blade gets blunt from:
1. The power of the motor can go down by using
extension cables. The saw speed also goes down and
the diamond cutting blade becomes blunt. Do not use
extension cables longer than 30 meter. A minimum
thickness of 2,5 mm² is necessary. In case of using
cable drums these need to be unrolled completely.
2. The type of blade is not suitable for the material to be
sawn. You need a dierent kind of blade for cutting
concrete or hard stone and cutting abrasive materials.
Please contact the supplier for a professional advice.
3. The direction of the rotation of the diamond cutting
blade does not correspond with the direction on the
machine. Depending on the time length of the incor
rect use, the direction of the diamond cutting blade
must be changed or contact the supplier for a profes-
sional advice.
4. The diamond cutting blade does not rotate centrical-
ly. By pushing the diamond cutting blade into
the material, the diamond textures will break and
the diamond cutting blade becomes blunt. When
the diamond cutting blade is worn out eccentric the
manufacturer has the possibility to make it centric
again.
WARRANTY
For the machine, a guarantee period of 12 months applies
from the moment of delivery. Guarantee claims must be
shown by submission of purchase invoice. The guarantee
includes the repair of defects which have occurred and can
be linked by to material or manufacturing faults.
Not covered by guarantee:
Not covered by guarantee:
Defects or damages which have arisen due to incorrect use
or connection.
Machine overload.
When maintenance has been carried out incorrectly or
badly.
Information in the manual has not been properly
followed.
The machine is used by unqualified persons.
If the machine is used for purposes for which it is
unsuitable.
The machine is repaired using unoriginal parts.
If the machine encryption is damaged or deleted.
If defects are caused by fire, damp and/or transport.
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in conformity with the following standards or standard-
ized documents:
EN 60745-1; EN 61000; 2006/42/CE; 2014/30/CE; 2002/95/CE
EN 12100:2010
EN 14121-2:2012
EN 13857: 2008
EN 1005-2: 2003
EN 1005-4: 2005
EN 60204-1:2006
EN 60529:1992/A1:2000
EN 61000-6-2: 2005
EN 61000-6-4:2006+A1:2011
Director: C.J. van Beek
01-02-2021
CARAT Nederland B.V.
Nikkelstraat 18, 4823 AB Breda, Nederland
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Carat MZ-350 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Carat MZ-350 in de taal/talen: Nederlands, Engels, Frans als bijlage per email.

De handleiding is 1.17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info