816472
14
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
14
manipulate the vacuum hose. When rocks or chunks of
stone/masonry are drawn into the vacuum hose, cease
work and clean the vacuum hose immediately. Prevent
the vacuum hose from being bent or creased.
Use the wall saw machine only as intended for.
Observe the general requirements for construction sites.
Provide for good ventilation.
Ensure that the work area is free of obstructions. For
longer grinding jobs, the vacuum cleaner must be able to
move along freely and at the right time.
Wear hearing protection, protective goggles, a dust mask
and gloves as required. As dust mask, use at least a
particle-filtering class FFP 2 half-mask.
Use a suitable vacuum cleaner for cleaning the work-
place. Prevent settled dust from being swirled up by
sweeping.
ASSEMBLY INSTRUCTIONS
Necessary tools:
• Wrench 6 mm.
• Screwdriver or pin.
To install the diamond cutting blade follow next steps (see
page 4, image A):
• Disconnect from the power supply.
• Loosen the depth locking leaver (#10).
• Remove the flange cover from the blade guard.
• Move the motor until the flange with bolt appears before
the hole.
Loosen the bolt with the delivered wrench and remove
the flange. It is possible that the bolt is stuck. In that case:
use a pin or screwdriver between the diamond cutting
blade’s teeth to block the axle, and loosen the bolt.
Check the condition of the flange set. The surfaces
between the flange and the diamond cutting blade need
to be clean and must fit exactly.
Mount the new diamond cutting blade. Please pay
attention to the direction of rotation. The direction on
the diamond cutting blade has to be identical to the
machine’s rotation direction.
Mount the flange on the axle.
Screw the bolt in the axle.
Prevent the diamond cutting blade from turning by
blocking it with a screwdriver or pin between the teeth of
the diamond cutting blade and tighten the bolt.
Use the same procedure to change a worn diamond
cutting blade.
OPERATION INSTRUCTIONS
Before cutting in a wall, floor or similar object: investigate
whether the object contains any electric, water or gas
conduits. If necessary, use a locator for detecting conduits
in the object.
Only use diamond cutting blades.
It is strictly forbidden to use other blades, like circular
woods blades, because the extra necessary protection fails.
Do not use deformed, damaged or bad diamond cutting
blade.
The voltage of the wall socket must be similar to the
voltage indicated on the machine.
To prevent unintentional starts, the wall saw machine is
provided with a lock-o button (#12).
For further use of the machine please check the safe-
guards for proper functioning. In case of damage to the
case or other parts, these need to be repaired or repla- ced
by a professional service department. Don’t use other
equipment that cannot be flawlessly switched ON and OFF.
While using, please hold the machine with both hands
Starting the machine:
Connect to the power supply.
Press the lock-o button (#12).
Press the main ON/OFF switch (#13).
Release the switch (#13 ) to turn the machine OFF.
Adjust the cutting depth.
The depth of the cut needs to be adapted to
of the hardness of the material to be cut.
Using the machine as followed will prevent
any overload.
Cutting in concrete has to be done in steps of 2,5 to 5 cm
of depth; so for instance: a depth of 12 cm depth can be
reached in 2 or 3 steps. Cut brick in steps of 5 to 8 cm,
depending on the hardness of the stone.
Adjust the cutting depth:
• Disconnect from the power supply.
• Loosen the depth locking leaver (#10).
• Adjust the saw depth by moving the motor along the rails.
• Lock the depth locking leaver (#10).
Use the right diamond cutting blade.
Choose a type of diamond cutting blade which is suitable
for the material to be sawn. We advice CARAT diamond
cutting blades. Please read all the instructions of the dia-
mond cutting blades.
Make sure that the diamond cutting blade is turning in the
right direction. Check the arrow on the blade guard for the
correct direction.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Carat MZ-350 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Carat MZ-350 in de taal/talen: Nederlands, Engels, Frans als bijlage per email.

De handleiding is 1.17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info