709292
207
Verklein
Vergroot
Pagina terug
1/231
Pagina verder
207
Troubleshooting
Cards and Accessories
Cannot insert the SD card.
- The card you are trying to insert is not facing the correct direction. Turn it over and insert it.
Cannot record on the SD card.
- A compatible card must be used (A 33).
- Initialize the card (A 35) when you use it with the camcorder for the first time.
- The LOCK switch on the SD card is set to prevent accidental erasure. Change the position of the LOCK switch.
-Photos can be recorded only to SD card B. Insert a card into SD card slot B.
-The card is full or it already contains the maximum number of clips (999 clips). Delete some clips (A 140) to free some
space or replace the card.
- The folder and file numbers have reached their maximum value. Set the > [" Recording/Media Setup] >
[Photo Numbering] setting to [Reset] and insert a new card.
Recording to and playing back from an SD card is slow.
-This ma
y occur as clips and photos are recorded/deleted over time. Save your recordings (A 151) and initialize the
card (A 35).
The optional RC-V100 Remote Controller or commercially available remote control does not work.
-Make sure that > [$ System Setup] > [REMOTE Term.] is set to [RC-V100 (REMOTE B)] or [RC-V100
(REMOTE A)] when using the optional RC-V100 Remote Controller or [Standard] when using a commercially available
remote control.
- Turn off the camcorder, reconnect the remote controller and then turn the camcorder back on again.
-When > [! Custom Picture] > [Activate Other Settings] is set to [Off] or the currently selected custom
picture file is protected, detailed custom picture settings cannot be adjusted using the RC-V100. Set [Activate Other
Settings] to [On] after selecting a custom picture file that is not protected (A 121).
Connections with External Devices
Video noise appears on a nearby TV screen.
-When using the camcorder in a room where a TV is located, keep a distance between the compact power adapter and
the power or antenna cables of the TV.
Playback looks fine on the camcorder but there is no image on the external monitor.
-The camcorder is not connected correctly to the external monitor. Make sure you are using the correct connection
(A 145).
- The video input on the external monitor is not set to the video terminal to which you connected the camcorder. Select
the correct video input.
The computer does not recognize the camcorder even though the camcorder is connected correctly.
-Disconnect the USB cable and turn off the camcorder. After a short while, turn it on again and restore the connection.
- Connect the camcorder to a different USB port on the computer.
-Establish the USB connection while the [Photos] index screen is displayed (A 132).
Cannot transfer clips or photos to the computer.
-The SD card contains too many clips and photos. Delete clips or photos until the card contains a combined total of
2,500 (Windows)/1,00
0 (macOS) or fewer and then use a card reader to transfer the recordings from the card.
There is no picture or sound from an external monitor connected to the SDI terminal
-Make sure the connected external device is compatible with 12G-SDI and the frame rate used.
-Check that the external monitor’s settings match the configuration of the output signal selected on the camcorder
(A 143).
There is no picture or sound from an external monitor connected to the HDMI OUT terminal
-Disconnect the HDMI cable and then restore the connection or turn the camcorder off and then on again.
-Make sure the external monitor is compatible with the output signal selected on the camcorder (A 143).
Peaking/B&W image/magnification/zebra patterns/waveform monitor do not appear on the viewfinder.
-Check that the display of desired assistance function is enabled for the viewfinder ([B&W Image: VF] (A 188),
[Magn.: VF+LCD], [Peaking: VF], [Zebra: VF], [WFM: VF] (A 189)).
Peaking/B&W image/magnification/zebra patterns/waveform monitor do not appear in the video output from the SDI
terminal.
-Check that that displ
ay of the desired assistance function is enabled for the S DI terminal ([B&W Image: SDI] (A 188),
[Magn.: SDI/HDMI], [Peaking: SDI], [Zebra: SDI], [WFM: SDI] (A 189)).
207

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Canon XF705 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Canon XF705 in de taal/talen: Engels als bijlage per email.

De handleiding is 17,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Canon XF705

Canon XF705 Gebruiksaanwijzing - Nederlands - 229 pagina's

Canon XF705 Gebruiksaanwijzing - Deutsch - 238 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info