709292
205
Verklein
Vergroot
Pagina terug
1/231
Pagina verder
205
Troubleshooting
Changing between recording (
Ü
REC) and record standby (STBY) takes longer than usual.
-When the SD card contains a large number of clips, some operations may take longer than usual. Save your clips
(A 151) and initialize the card (A 35). Alternatively, replace the card.
The camcorder cannot record to the SD card properly.
-This may occur as recordings are made and deleted over time. Save your clips (A 151) and initialize the card (A 35).
After using the camcorder for a long time, it becomes hot.
- The camcorder may become hot after using it continuously for long periods of time; this is not a malfunction. If the
camcorder becomes unusually hot or it becomes hot after using it only for a short while, it may indicate a problem with
the camcorder. Consult a Canon Service Center.
Playback
Cannot delete a clip.
- The clip may have an $ mark. Remove the $ mark (A 139).
- The LOCK switch on the SD card is set to prevent accidental erasure. Change the position of the LOCK switch.
Deleting clips takes longer than usual.
-When the SD card contains a large number of clips, some operations may take longer than usual. Save your clips
(A 151) and initialize the card (A 35).
Cannot copy clips.
-There is not enough available space on the destination card or the card already contains the maximum number of clips
(999 clips). Delete some clips (
A
140) to free some space or replace the card.
Cannot delete a photo.
- The LOCK switch on the SD card is set to prevent accidental erasure. Change the position of the LOCK switch.
-Photos that were protected using other devices cannot be deleted with the camcorder.
Indicators and Onscreen Displays
appears in red on the screen.
- The battery pack is exhaus ted. Replace or charge the battery pack.
í
appears on the screen.
- The camcorder cannot communicate with the battery pack attached so the remaining battery time cannot be
displayed.
The tally lamp does not illuminate.
- Set > [$ System Setup] > [LED] > [Tally Lamp (Front)] or [Tally Lamp (Rear)] to [On].
The tally lamp flashes quickly. (4 flashes per second)
- The battery pack is exhaus ted. Replace or charge the battery pack.
-There is not enough available space on the SD card. Delete some clips (A 140) to free some space or replace the
selected card.
-A system error has occurred. Turn the camcorder off and then on again. If this does not solve the problem, consult a
Canon Service Center.
The tally lamp flashes slowly. (1 flash per second
)
- The combined available space on both cards is low. Replace the card that is not being recorded onto.
/ appears in red on the screen.
- A card error occurred. Remove and reinsert the card. If the display does not change back to normal, save your
recordings (A 151) and initialize the card (A 35).
6/7 (in red) and [END] appear on the screen.
-The SD card is full. Use a different card or delete some clips (A 140) to free some space on the card.
Even after stopping recording, the access indicator stays illuminated in red.
-The clip is being recorded on the card. This is not a malfunction.
b
appears in yellow on the screen.
-The camcorders internal temperature has reached a predetermined level. You can continue using the camcorder.
205

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Canon XF705 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Canon XF705 in de taal/talen: Engels als bijlage per email.

De handleiding is 17,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Canon XF705

Canon XF705 Gebruiksaanwijzing - Nederlands - 229 pagina's

Canon XF705 Gebruiksaanwijzing - Deutsch - 238 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info