683279
1
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
This Installation Guide is comprised of pages [1/2] and [2/2]. Please be sure to read the
“Safety Precautions” section for correct use. After reading this Installation Guide, keep it
in a readily accessible location for future reference.
The included “About Hydrophilic Coating Models” must be read before installing VB-
M741LE-H. Incorrect use can result in the diminishing of the hydrophilic coating.
* Some cameras are not available in certain countries or regions.
Caution
Request a professional installer for all installation work. Never try to install
the camera yourself. Doing so may result in unforeseen accidents such as
dropping the camera or electric shock.
Check Included Items
Camera, Screws (M4) x 4 Template Installation Guide (This document)
Setup CD-ROM Warranty Card Ceiling Plate
I/O Interface Cable (BK2-0035-000)
Safety Wire, Screws (M3) x 1
Power Interface Cable (BK2-0036-000)
Dedicated wrench
Waterproofing tape Waterproofing explanation sheet
About Hydrophilic Coating Models
Weather Shield WS700-VB Installation Guide
Weather Shield WS700-VB, Screws (M3) x 2
Symbols used in this Installation Guide
: VB-M741LE-H : VB-M741LE : VB-M740E
Accessories
The following accessories can be purchased separately as necessary. Some accessories are
not available in certain countries or regions.
Conduit Box CB740-VB
Dedicated accessory used to protect wiring cables that cannot be stored above the ceiling.
This can be attached to the composite pipe.
Pendant Mounting Kit PC640-VB
Dedicated accessory used to install the camera to the end of pipe that extends from high
ceilings, such as in big-box stores.
Weather Shield WS700-VB
Dedicated accessory to protect the main camera from rain.
Canon AC Adapter PA-V18
Dedicated AC adapter for this camera.
Safety Precautions
Installation Precautions
Warning
Failure to follow the instructions may result in death or serious injury.
Do not install in the following places:
Places in strong direct sunlight, near heat-generating objects, or locations subject to high temperatures
Places near fire sources or flammable solvents (alcohol, thinner, fuel, etc.)
Places subject to oily smoke or steam
Confined or enclosed places
Failure to do so may result in fire or electric shock.
Insulate the ends of cables you are not using.
Failure to insulate may result in fire or electric shock.
Notes on Power Supply
Only use the dedicated AC adapter (sold separately) for AC power.
Do not set any heavy objects on the power cable (or the LAN cable for a PoE+/PoE power supply).
Do not pull, forcibly bend, scratch, or modify the power cable (or the LAN cable for a PoE+/PoE power supply).
Do not cover or wrap the AC adapter (sold separately) with cloth or blankets.
Failure to do so may result in fire or electric shock.
Caution
Failure to follow the instructions may result in injury.
For installation or inspection of this camera, consult the dealer where you purchased the product.
This installation should be made by a qualified service person and should conform to all local codes.
When installing, make sure the surface is capable of withstanding the total weight of the camera and
accessories, and sufciently reinforce if necessary.
Be sure to use installation screws designed for the type of surface the camera is to be installed.
Periodically check the parts and screws for rust and loosening, in order to prevent injuries and
equipment damage due to falling items.
Do not install in unstable places, places subject to significant vibration or impact, or places subject to
salt damage or corrosive gas.
Do not install in places subject to strong winds.
Do not install where snow can accumulate directly on the camera.
Be sure to attach the safety wire when installing the camera.
Failure to do so may result in the camera falling or other accidents.
Do not touch the edges of metal parts with bare hands.
Be careful not to get your fingers caught when installing.
Failure to do so may result in injuries.
Avoid looking directly at the infrared illumination at close distances for long periods
of time.
Intense infrared illumination can cause eye damage.
Caution
Failure to follow the instructions may result in property damage.
Do not install on an unstable surface.
After turning off the power, do not turn the power on again for at least five seconds.
Take measures to remove static electricity before performing any procedures.
If there is condensation, please wait to power on, until the condensation dissipates.
Please waterproof and dust-proof camera, when installing outdoors.
Failure to do so may result in malfunctions.
Take care not to damage wiring or piping.
Failure to do so may result in damage to peripheral items.
Important
We recommend the installation of a lightning arrester (a surge protection device) as a measure against
failures caused by lightning strikes. Please refer to our website for details.
Precautions for Installing the Camera Outdoors
When installing the camera outdoors, observe the following
precautions to retain waterproof/dustproof capabilities.
Completely wrap the cable connections and the ends of cables you
are not using, including the connectors, with waterproof tape up to
the cable jacket, so as not to allow water to enter. Please refer to
the waterproofing explanation sheet for details on how to wrap
the waterproofing tape.
When mounting the camera onto a wall or other upright
surface, make sure that the cables and composite pipe are
facing down to prevent rain infiltration.
If wiring by connecting the camera to the composite pipe,
bridge the gap using the conduit box (sold separately). When
connecting the conduit box and the pipe, apply silicon sealant
to seal it tightly after attaching the pipe to prevent water getting in as necessary.
Precautions for Use
Warning
Failure to follow the instructions may result in death or serious injury.
If you discover defective conditions such as smoke, strange sounds, heat or strange odors,
immediately stop using the camera and contact your nearest dealer.
Fire or electric shock may result from continued use of the product.
If thunder starts, stop installation or inspection etc. and do not touch the camera or continue
connecting the cable.
Do not disassemble or modify the camera.
Do not damage the connecting cable.
Do not insert foreign objects such as water or metal into the camera.
Do not use flammable sprays near the camera.
Do not leave LAN cables, external power supply, or the power connector for the AC adapter (sold
separately) connected when the camera is not in use for long periods.
Do not use flammable solvents such as alcohol, paint thinner or benzine when cleaning the camera.
Failure to do so may result in fire or electric shock.
Only for European Union and EEA (Norway, Iceland and Liechtenstein)
These symbols indicate that this product is not to be disposed of with your household waste,
according to the WEEE Directive (2012/19/EU), the Battery Directive
(2006/66/EC) and/or national legislation implementing those Directives.
If a chemical symbol is printed beneath the symbol shown above, in
accordance with the Battery Directive, this indicates that a heavy metal (Hg =
Mercury, Cd = Cadmium, Pb = Lead) is present in this battery or accumulator at
a concentration above an applicable threshold specified in the Battery Directive.
This product should be handed over to a designated collection point, e.g., on an authorized one-
for-one basis when you buy a new similar product or to an authorized collection site for recycling
waste electrical and electronic equipment (EEE) and batteries and accumulators. Improper
handling of this type of waste could have a possible impact on the environment and human health
due to potentially hazardous substances that are generally associated with EEE. Your cooperation
in the correct disposal of this product will contribute to the effective usage of natural resources.
For more information about the recycling of this product, please contact your local city
office, waste authority, approved scheme or your household waste disposal service or visit
www.canon-europe.com/weee, or www.canon-europe.com/battery.
Part Names
6
11
10
17
2
3
1
5 7 8 9
12
4
13 14 15 16
Serial_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
MAC_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1. Lens protector / 2. LED (Orange) / 3. LED (Blue)*
1
/ 4. Notched cap /
5. Power connection terminal
/
6. External device I/O terminals
/
7. Audio input terminal (Black) (common LINE IN and MIC IN)
/
8. Audio output terminal (White) (LINE OUT)
/ 9. 100Base-TX LAN connector
10. Pan axis adjustment screw / 11. Tilt axis adjustment screw /
12. Rotation axis adjustment screw / 13. Memory card slot / 14. Reset switch*
2
/
15. LED (Blue)*
1
/ 16. Reboot switch / 17. Memory card cover
*
1
On: when powered on, during reboot, during normal use / Off: when [Turn Off] is selected
(please refer to the “Operation Guide”)
*
2
Please refer to the “Operation Guide” for the method to reset the camera.
When the temperature within the camera is low (heater activated)
When the unit is powered by a 24 V AC/ PoE+ power source, the heater unit can be used.
The heater unit will be activated automatically when the temperature within the camera is low.
The orange LED will be lit, until the camera has warmed up enough to start transferring video.
Once the temperature within the camera has reached the level where it can transfer the video
once again, the orange LED will turn off.
When there is condensation on the lens protector after being turned on
Condensation can occur on the inside of the lens protector, when the power has been
turned on for the first time after installation, or after not being turned on for a long time. The
condensation will dissipate after the power has been left on a while (this may take more than
a day at the longest), please wait to use the camera until you can confirm that the image is
correctly visible.
The contents of this guide are subject to change without any prior notice.
Network Camera
/ /
ENGLISH
BIE-7196-000
Installation Guide
1
2
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Canon VB-M740E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Canon VB-M740E in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Canon VB-M740E

Canon VB-M740E Gebruiksaanwijzing - English - 287 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info