662404
8
Verklein
Vergroot
Pagina terug
1/59
Pagina verder
8
GB
Thank you for choosing this Campingaz
®
infrared
heater.
This operating handbook deals with infrared heater:
Comfort Heat IR
A - GENERAL SAFETY INSTRUCTIONS
- This appliance must be used and serviced in
accordance with the regulations and standards in force.
- Please read this handbook before using your
appliance.
- This appliance should not be used in high rise
flats, in basements, bathrooms or bedrooms.
- Only use this appliance in a well ventilated room.
- This appliance should not be used in leisure
vehicles such as caravans and camping-cars.
- This appliance should not be installed in the
vicinity of walls, pieces of furniture, hangings,
curtains, bedding items and other inflammable
materials. To prevent fire hazards, it is strictly
forbidden to cover the appliance.
- This appliance should always be directed to the
centre of the room.
- Do not use your heater less than 50 cm from a wall
or combustible object.
- The gas hose should be replaced when the expiry
date is passed or whenever it is damaged or
develops surface cracks.
B - ASSEMBLING THE HEATER
Remove the body of the heater, the plastic panel for
protecting the gas cylinder and the bag containing the
accessories from the packaging:
- Remove the screws that attach the cylinder support to
the rear of the heater (see fig.1 point 3).
- Attach the four wheels (found in the accessories pack)
to the cylinder support (see fig.1 point 4) using the 4
M8 nuts and the no. 13 wrench from the accessories
pack to do this.
- After attaching the four wheels, attach the cylinder
support to the body of the heater using 4 M8 nuts and
4 M8 bolts from the accessories pack (see fig.1 point
5) and the no. 13 wrench mentioned above.
The heater is now ready to be attached to the gas
cylinder.
C - SETTING TO SERVICE
IMPORTANT
This operating handbook is intended for enabling
you to correctly and safely use your Campingaz
®
appliance.
Refer to the handbook to familiarise yourself with the
appliance before connecting the gas bottle.
Comply with this operating handbook instructions.
This appliance must be connected using a pressure
reducing valve and a hose. Call your vendor.
Non conformance with these instructions may be
dangerous for the user and his environment.
Permanently keep this handbook in a safe place so as
to refer to it when needed.
This appliance is preset in factory to operate with
butane using appropriate pressure reducing valve and
hose.
In operation, this appliance must be held away from
inflammable materials.
Never use a heater which leaks gas, does not operate
correctly or is damaged. Return it to your vendor who
will give you the address of the nearest dealer.
This appliance should never be modified nor used
in applications for which it is not designed.
C - 1 - Ventilating the room:
This appliance is an infrared combustion heater
designed to be used in adequately ventilated premises.
A suitable ventilation makes it possible to exhaust
combustion residues and renew the combustion air.
The appliance should not be installed in a room the
volume of which is less than 82 m
3
for living-rooms and
41 m
3
for other rooms.
Air renewal ventilation area should not be less than
103 cm² evenly distributed between room upper and
lower levels.
A safety device will shut off the gas, thus extinguishing
the appliance if normal ventilation conditions are not
met.
C - 2 - Gas bottle and pressure reducing valve:
This appliance is designed to operate with 11 Kg to
15 Kg Butane or Propane gas bottles fitted with an
adequate pressure reducing valve (See Gas and
operating pressures page 3).
Only use the type of gas stipulated by the manufacturer.
In France, Belgium, Great Britain and Ireland it is
strictly forbidden to use another gas type than
Butane.
To install the pressure reducing valve, follow pressure
reducing valve operating handbook instructions.
To connect or replace the bottle, always operate in a
well-ventilated place, never in presence of a flame,
spark or heat source.
C - 3 - Gas hose:
France:
The appliance must be used with a hose fitted with a G
1/2 threaded nut to be screwed to the appliance and an
M 20x1.5 threaded nut to be screwed to the pressure
reducing valve (XP D 36-112 Standard).
The hose shall be 0.50 m long. It should be replaced
when the expiry date on the hose is passed or
whenever it is damaged or develops surface cracks. Do
not pull or twist the hose. Keep it away from parts that
are likely to get heated.
Hose installation, G 1/2 and M 20x1.5 nuts (XP D
36-112 Standard) (See Fig. 2 and 3):
- Check tightness in compliance with indications of
paragraph D-2.
Switzerland, Germany, Austria:
This appliance must be used with a DIN hose the
quality of which shall comply with the use of butane or
propane gas.
The hose shall be 0.50 m long. It should be replaced
if it is damaged or develops surface cracks or when
so required by national legislation. Do not pull or twist
the hose. Keep it away from parts that are likely to get
heated.
Connecting the hose: to connect the hose to appliance
inlet union, firmly but moderately tighten the hose using
2 suitable spanners:
- 14 mm spanner to tighten appliance inlet union.
- 17 mm spanner to screw in hose nut.
M 20x1,5
Pressure
reducing valve
G 1/2
Appliance
black
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Campingaz Comfort Heat IR - IR 5000 Comfort bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Campingaz Comfort Heat IR - IR 5000 Comfort in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools als bijlage per email.

De handleiding is 2,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info