6
BASIC SETUP
Setting the Date and Time/Date Stamp Feature
You may want to go into the main options menu and set the correct date and time before beginning to take
photos (or turn o the date stamp feature, as the default setting is “on”). To set date and time:
Raise the LCD display and press the 1. ON/OFF (B) button.
Press 2. MENU (C). Press the Minus key (D) 7 times to highlight “Clock Set”, and press the Enter button (D).
Now set the Year, Month, Date, Hour (24 hr format), and Minute, using the 3. Plus/Minus keys to make
changes, and the Right key (D) to move to the next eld.
Once the date & time are set, press the 4. Enter button.
Press the 5. Minus arrow key once to highlight “Date Stamp”, press Enter, then highlight your preference
using the Plus/Minus keys: Month-Day-Year format, Year-Month-Day format, or OFF (the date will not be
stamped on your photos).
Press 6. Enter, then press the Minus key twice to highlight “Exit” , then press Enter again to exit the menu
options and return to the “live” preview display.
Auto O (Power Save)
By default, the SyncFocus will automatically turn o if no buttons or controls have been pressed for two
minutes. This helps save power and extend battery life when the camera is accidently left on. However, when
you are rst learning to use the camera you may want power to remain on (until you press ON/OFF) as you
get familiar with the features and controls. To do this, enter the main menu as described above in “Setting
the Date...”, highlight “Auto O”, press Enter, and select “Cancel”. Press Enter, then exit the menu as described
above.
