4
To stop recording the video, press the SNAP button again. By default, videos are recorded as a 15 second loop (“instant
replay”). To change this, press MENU-the rst item is “Resolution”. Press Enter, then select “Video Size”. Use the Plus/Minus
keys to select a dierent video resolution and frame rate combination (which determines loop length-8, 15, 30 or 60 seconds).
You also have the option to select a “Norm” video setting if you prefer to shoot standard video clips, instead of loops that re-
record (refresh) automatically. For more information regarding the still and video resolution options and other menu
settings, please see the “Using the Main Menu” section of this manual.
7) To review or playback a still photo or video, press the Enter button. You will see the most recent still photo or video. To
review previous photos or videos one at a time, press the Left key. To play back a video, press the SNAP button (press again
to stop playback). To delete photos/videos, press MENU. Select Delete One (only the currently displayed photo/video) by
pressing Enter, then the Plus button to select “OK”, and press Enter to delete the le. If you wish to delete all photos/videos,
use the Format menu option as described earlier.
8) To download photos/videos to your PC, connect the USB cable from the SyncFocus to your computer. The SyncFocus will
be recognized as a standard “USB Mass Storage” device and will appear as a “Removable Disk” under the “My Computer” list
(on Macs, an icon will appear on your desktop). The photo les are located in the “DCIM” folder on this “Removable Disk”. Copy
the les to your hard drive (drag or use the “copy les” option), then disconnect the camera. (On Mac computers, drag the
“disk” that appeared on your desktop when the camera was connected into your Trash to “eject” it before disconnecting.) The
jpg standard les from the SyncFocus may be edited with any photo software you choose to use.
NOTE: If you are not using an SD card in the SyncFocus, be sure to download all les from its internal memory before changing batteries
and before storing the camera for a long period. If you use an SD card, photos may also be downloaded by removing the card and using
any USB card reader with an SD slot.
Your SyncFocus camera is already set for high resolution and quality right out of the box, and it is not necessary to
change any of the settings to get good results. However, many features and options are provided to enhance your
enjoyment of the camera. For more information about them, please refer to the remainder of this User Manual.
QUICK START GUIDE: BUSHNELL SYNCFOCUS™ INSTANT REPLAY
