779872
160
Verklein
Vergroot
Pagina terug
1/234
Pagina verder
MY22B01 - 12_1.0_26.08.2021 159
Cleaning and servicing
7.5.9.1 Checking the derailleur gears
The chain is tensioned by the rear derailleur in
pedelecs with derailleur gears.
1Place the pedelec on stand.
2Check to see if the chain is sagging (visual
inspection).
3Gently press the rear derailleur forwards to
check whether it moves and whether it goes
back into position by itself.
If the chain is sagging or the rear derailleur
does not go back into position by itself, contact
your specialist dealer.
7.5.9.2 Checking the hub gear
In the case of pedelecs with a hub gear or back-
pedal brake, the chain or the belt is tensioned by
a eccentric bearing in the bottom bracket axle.
Special tools and specialist knowledge are
required to tension the chain. Contact specialist
dealer.
Remove the chain guard on pedelecs with a
circumferential chain guard.
1Place the pedelec on stand.
2Check the chain and belt tension in three or
four positions, turning the crank a full
revolution.
Figure 148: Checking the chain tension
If the chain or the belt can be pushed more than
2 cm, the chain will need to be re-tensioned.
Contact specialist dealer.
If the chain or belt can only be pushed up and
down less than 1 cm, you will need to the chain
or belt slightly. Contact specialist dealer.
The ideal chain and belt tension has been
achieved if the chain can be pushed between a
maximum of 10 and 15 mm in the middle
between the pinion and the toothed wheel. The
crank must also turn without resistance.
7.5.10 Checking the gear shift
1Check whether all gear shift components are
free of damage.
2Contact your specialist dealer if components
are damaged.
3Place the pedelec on stand.
4Turn the pedal crank clockwise.
5Switch through all speeds.
6Check that pedelec can switch through all
speeds without making unusual noises.
7Adjust the gear shift if gears can not be
changed correctly.
7.5.10.1 Electric gear shift
1Check the cable connections for damage and
corrosion and ensure they are firmly in
position.
If cable connections are loose, damaged or
corroded, contact your specialist dealer.
7.5.10.2 Mechanical gear shift
1Change gear a number of times. Check
whether the Bowden cables get stuck or they
make scraping noises.
2Check the physical condition of the Bowden
cables for visible damage and check to see if
wire strands are broken.
Have defective Bowden cables replaced.
Contact specialist dealer.
7.5.10.3 Checking the derailleur gears
1Check that there is clearance between the
chain tensioner and spokes.
If there is no clearance or the chain scrapes
against the spokes or tyres, contact your
specialist dealer.
2Check that there is clearance between the
chain or rear derailleur and spokes.
If there is no clearance or the chain scrapes
against the spokes, contact your specialist
dealer.
10-15 mm
10-15 mm
160

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bulls Cross Rider EVO - BOSCH Intuvia 2022 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bulls Cross Rider EVO - BOSCH Intuvia 2022 in de taal/talen: Engels als bijlage per email.

De handleiding is 32.78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Bulls Cross Rider EVO - BOSCH Intuvia 2022

Bulls Cross Rider EVO - BOSCH Intuvia 2022 Gebruiksaanwijzing - Nederlands - 233 pagina's

Bulls Cross Rider EVO - BOSCH Intuvia 2022 Gebruiksaanwijzing - Deutsch - 231 pagina's

Bulls Cross Rider EVO - BOSCH Intuvia 2022 Gebruiksaanwijzing - Français - 234 pagina's

Bulls Cross Rider EVO - BOSCH Intuvia 2022 Gebruiksaanwijzing - Italiano - 236 pagina's

Bulls Cross Rider EVO - BOSCH Intuvia 2022 Gebruiksaanwijzing - Espanõl - 237 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info