779872
159
Verklein
Vergroot
Pagina terug
1/234
Pagina verder
MY22B01 - 12_1.0_26.08.2021 158
Cleaning and servicing
7.5.4 Checking the stem
The stem and quick release system must be
inspected at regular intervals. The specialist
dealer should adjust them if they require
adjustment.
If the hexagon socket head screw is also
loosened, the headset backlash also needs to
be adjusted. Medium-strength thread locker,
such as Loctite blue, then needs to be applied
to the loosened screws and the screws
tightened as per specifications.
Check metal contact surfaces on cone, stem
clamping screw and fork steerer for corrosion.
Take pedelec out of service if there is any wear
or signs of corrosion. Contact specialist dealer.
7.5.5 Check the handlebars
1Take hold of handlebars with both hands on the
handles.
2Move handlebars up and down and press to tilt.
If the handlebars move, contact specialist
dealer.
3Place front wheel in position where it can't
move sideways (e.g. in a bike stand).
4Hold handlebars firmly with both hands.
5Check if the handlebars are able to twist
against the front wheel.
If the handlebars can move, contact your
specialist dealer.
7.5.6 Checking the saddle
1Hold saddle firmly.
2Check whether the saddle twists, tilts or can be
pushed in one direction or other.
If the saddle twists, tilts or can be pushed in
one direction or other, adjust the saddle (see
Section xxx).
Contact your specialist dealer if the saddle
cannot be fixed into position.
7.5.7 Checking the seat post
1Take seat post out of the frame.
2Check seat post for cracks and corrosion.
3Reinsert seat post.
4Check pedal.
5Hold pedal and try to move it sideways toward
the inside or outside. In doing so, observe
whether the crank arm or bearing move
sideways.
If the pedal, crank arm or crank bearing moves
sideways, fasten screw on the pedal crank
rear.
6Hold pedal and try to move it upwards and
downwards vertically. In doing so, observe
whether the pedal, crank arm or crank bearing
moves vertically.
If the pedal, crank arm or crank bearing moves
vertically, fasten screw.
7.5.8 Checking the chain
Check chain for rust or warping.
Replace a rusted chain since it will not be able
to withstand the tensile loads from the drive.
Contact your specialist retailer.
7.5.9 Checking the chain and belt tension
7If a hub gear is fitted, the rear wheel must be
pushed backwards and forwards to tighten the
chain. Contact specialist dealer.
Notice
Excessive chain tension increases wear. If the
chain tension is too low, there is a risk that the
chain will slip off the chain wheels.
Check the chain tension once a month.
159

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bulls Cross Rider EVO - BOSCH Intuvia 2022 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bulls Cross Rider EVO - BOSCH Intuvia 2022 in de taal/talen: Engels als bijlage per email.

De handleiding is 32.78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Bulls Cross Rider EVO - BOSCH Intuvia 2022

Bulls Cross Rider EVO - BOSCH Intuvia 2022 Gebruiksaanwijzing - Nederlands - 233 pagina's

Bulls Cross Rider EVO - BOSCH Intuvia 2022 Gebruiksaanwijzing - Deutsch - 231 pagina's

Bulls Cross Rider EVO - BOSCH Intuvia 2022 Gebruiksaanwijzing - Français - 234 pagina's

Bulls Cross Rider EVO - BOSCH Intuvia 2022 Gebruiksaanwijzing - Italiano - 236 pagina's

Bulls Cross Rider EVO - BOSCH Intuvia 2022 Gebruiksaanwijzing - Espanõl - 237 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info