718772
182
Verklein
Vergroot
Pagina terug
1/212
Pagina verder
TROUBLESHOOTING
180
* Adjust the thread tension while test sewing on a
piece of scrap fabric that is the same as that used in
your project.
* When the bobbin thread is visible on the right side of
the fabric.
Set the upper thread tension to a lower number. (Loosen
the thread tension.)
* When the upper thread is visible on the wrong side of
the fabric.
Set the upper thread tension to a higher number.
(Tighten the thread tension.)
Fabric is Caught in the Machine and Cannot
Be Removed
If the fabric is caught in the machine and cannot be
removed, the thread may have become tangled under
the needle plate. Follow the procedure described below
to remove the fabric from the machine. If the operation
cannot be completed according to the procedure,
instead of attempting to complete it forcefully, contact
your nearest Brother authorized service center.
Removing the Fabric From the Machine
a
Immediately stop the machine.
b
Turn off the machine.
c
Remove the needle.
If the needle is lowered into the fabric, turn the
handwheel away from you (clockwise) to raise the
needle out of the fabric, and then remove the needle.
* Refer to “CHANGING THE NEEDLE” on page 48.
d
Remove the presser foot and presser foot holder.
If the thread is entangled on the presser foot, remove the
entangled thread, and then raise the presser foot lever to
remove the presser foot. Otherwise, the presser foot may
be damaged.
* Refer to “CHANGING THE PRESSER FOOT” on
page 50.
e
Lift up the fabric and cut the threads below it.
If the fabric can be removed, remove it.
f
Remove the needle plate cover.
* Refer to “Cleaning the Race” on page 176.
g
Cut out the tangled threads, and then remove the
bobbin.
h
Remove the bobbin case.
If threads remain in the bobbin case, remove them.
i
Use the cleaning brush or a vacuum cleaner to remove
any lint or dust from the race and its surrounding area.
j
Use the disc-shaped screwdriver to loosen the two
screws on the needle plate.
If the upper threading and bobbin threading are
incorrect, the thread tension cannot be adjusted
correctly. Check the upper threading and bobbin
threading first, and then adjust the thread tension.
1 Cleaning brush
2 Race
If the fabric could be removed
Continue with step
p.
If the fabric could not be removed
Continue with step
j.
Compressed can air is not recommended to be
used.
Be careful not to drop the removed screws in the
machine.
a
b
182

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother Brother Innov-is XJ1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother Brother Innov-is XJ1 in de taal/talen: Engels als bijlage per email.

De handleiding is 12,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Brother Brother Innov-is XJ1

Brother Brother Innov-is XJ1 Gebruiksaanwijzing - Nederlands - 212 pagina's

Brother Brother Innov-is XJ1 Gebruiksaanwijzing - Deutsch - 212 pagina's

Brother Brother Innov-is XJ1 Gebruiksaanwijzing - Français - 212 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info