29
EN4 / PROGRAMMING YOUR MACHINE
•MODIFYING A WASHING
PROGRAMME
•During programming:
You can alter anything before you press the ”Start /
Pause” button .
•After the cycle starts:
— You cannot alter the type of textile (for example,
change from «COTTON» to «SYNTHETICS» or
from «SYNTHETICS» to «WOOLLENS», etc.).
NB:
-
If you turn the programme selector to a
different textile, the progress cycle light which is
lit at the time, and the display flash for a few
seconds to indicate that such an alteration is
prohibited and will not be effected.
-
To change the type of fabric during the cycle, you
must cancel the current programme and then
programme a new cycle.
— However, you can change the washing
temperature at the start of the washing phase for
the same type of textile.
NB: The time remaining will then be adjusted
accordingly.
— You can also change the spin speed throughout
the cycle.
— You can select ”Drip-dry” and ”Full drum stop” up
to the end of rinsing.
— You can activate option “ ” (Rinse plus) up to
the point that rinsing commences.
— You can deactivate all the options at any time
during the cycle provided that the particular action
has not already been completed.
— You cannot programme or modify a drying after
the start of a washing or drying cycle.
During delayed start:
—
Any kind of programme modification is accepted
during a delayed start’s waiting period.
— You can change the period for a ”delayed start”
period throughout the whole of the waiting period,
right up to the effective cycle starting time.
NB:
-
During this period, selecting a new time cancels
out the previous selection. The new period selected
is accepted based on the last selection made.
- If you wish to cancel ”Delayed start” during this
period, set display to ”0” and then briefly press
button .
The cycle will then start immediately.
— You can only activate option “ ” (Prewash)
during the waiting period for a ”Delayed start”.
— You can only modify the options “ ” (Easy
ironing),
“ ”
(Eco) and
“ ”
(Intensive) during the
waiting period for a ”Delayed start”.
•When the cycle is over:
When the display shows “- 0 -”, you can programme
a new cycle without having to press the “On/Off”
button again.
To do this, all you need to do is to press one of the
buttons , , or .
The machine is then ready to be
reprogrammed.
R432
I / O
2
A
A
B
1
2
