5 6
$
:c :
c c
1üüüücü ¯ ¯
a
a
Important information
Before using your washing machine for the first time
Do not put any washing in the washing machine! Turn the tap on. Pour into dispenser II:
– Approx. 1 litre water.
– Detergent (dosage according to manufacturer’s instructions for light soiling and according to degree of water
hardness).
– Set programme selector to
IEasy-Care 60 °C and select $ Start/Pause.
At the end of the programme set the programme selector to Off.
Protecting the washing and the machine
– When dosing all detergents, cleaning aids and cleaning agents, always follow the manufacturer's instructions.
– Empty pockets.
– Remove metal parts (paper clips, etc.).
– Wash delicates in the net/bag (tights, curtains, underwired bras).
– Close zips, button up covers.
– Brush sand out of pockets and collars.
– Remove curtain fittings or include in the net/bag.
Insert laundry
Insert large and small items of washing!
Do not jam items of washing between the washing machine door and rubber seal.
Washing with different degrees of soiling
Wash new items separately.
Light Do not prewash.
If required, pretreat stains. Select Eco
+
additional function.
Heavy
Load less washing. Select programme with
Prewash.
If required, pretreat stains. Select Eco
+
additional function.
Soaking Load washing of the same colour.
Pour soaking agent/detergent into dispenser II according to the manufacturer’s instructions. Set programme selector to
LcCottons 30 °C and select $ Start/Pause. After approx. 10 minutes select $ Start/Pause to stop the programme.
After the required soaking time reselect $ Start/Pause if the programme is to be continued or change the programme.
Starching Washing should not be treated with fabric softener.
Liquid starch can be used in all wash programmes. Pour starch into the fabric softener dispenser ~ according
to manufacturer’s specifications (if required clean beforehand).
Dyeing/Bleaching
Dye in household quantities only. Salt may attack stainless steel! Observe specifications of the dye manufacturer!
Do not bleach washing in the washing machine!
Emergency release e.g. if power failure occurs
The programme continues running when the power supply is restored.
If the washing is still to be removed, the door can be opened as described below:
Risk of scalding!
Detergent solution and washing may be hot. If required, leave to cool down.
Do not reach into the drum in case it is still rotating.
Do not open the door if you can still see water through the glass.
1. Set programme selector to Off, pull out the mains plug.
2. Removing base strip a see separate installation instructions.
3. Drain the water. aPage 10
4. Pull down emergency release with a tool and release.
Door can then be opened.
5. Attaching base strip a see separate installation instructions.
a
ʔ
ʔ
ʔ
ʔ
ʔ
ʔ
ʋ
ʔ
ʔ
ʔ
ʔ
ʔ
ʔ
ʔ
ʔ
ʔ
a
~
ʔ
ʔ
ʔ
~
a
¯
2
$
>
$
$
$
$
Individual settings
ʑ
Option buttons
You can change the spin speed and temperature beforehand and while the selected programme is running.
Effects dependent on the programme progress.
ʑ
Temp.°C
You can change the indicated washing temperature. The maximum washing temperature which can be selected
depends on the set programme.
ʑ
(rpm=Spin speed, revolutions per minute)/ (Rinse stop = without final
spin)
You can change the indicated spin speed or select (rinse stop = without final spin cycle, washing remains in the
water after the last rinse cycle).
The selectable maximum spin speed depends on the model and the selected programme.
ʑ
Ready in
The respective programme duration is displayed by selecting the programme. The programme start can be delayed
before the programme begins. The (Ready in) time can be set in hour steps up to maximum 24h.
Keep pressing the (Ready in) button until the required number of hours is indicated (h=hour). Select $ Start/
Pause. Settings cannot be made when the programme has started.
ʑ
Additional functions a Overview of programmes, Page 7
Eco
+
Energy-optimised washing by reducing the temperature while achieving a consistent
washing result.
The washing temperature is lower than the selected temperature. For special hygiene
requirements, the ā Allergy+ programme is recommended.
Prewash 7 For heavily soiled washing. Prewash at 30 °C.
Reduced Ironing Special spin sequence with subsequent fluffing. Gentle final spin at reduced spin speed.
Residual moisture of the washing slightly increased.
Aqua Plus = Increased water level. Additional rinse cycle. Longer programme duration.
For areas with very soft water or for further improvement of the rinsing result.
ʑ
$Start/Pause
For starting or interrupting the programme.
ʑ
Signal
2. Set volume for ...
set to Â
1 step to right select and
hold
+
1 step to right
set to Â
direct
... Button signals
... Information
set volume * 1 step to right set volume *
* If required,
select repeatedly
1. Activate setting mode
for signal volume
release
a
Lc
I
/
O
2
>
@
?c
ā÷
Z
c
a
> $
